Bluetooth4.0 for smart LED
蓝牙4.0智能LED
议价
加入意向 定制是可以接受的！
csr网！
智能LED控制解决方案：BLE + APP可实现LED智能控制。包括LED颜色控制，亮度控制，上下文模型，音乐部分模型，时序等。
1支持蓝牙网格，通过手机APP可以分组灯和重命名;
2通过手机可以进行亮度和颜色控制;
3支持上下文模型;
4支持音乐部分型号和时间。
csr网！
智能LED控制解决方案：BLE + APP可实现LED智能控制。包括LED颜色控制，亮度控制，上下文模型，音乐部分模型，时序等。
1支持蓝牙网格，通过手机APP可以分组灯和重命名;
2通过手机可以进行亮度和颜色控制;
3支持上下文模型;
4支持音乐部分型号和时间。
| 无线电功能 | 蓝牙4.0低能无线电 发射功率：+7.5 dBm 接收灵敏度：-92.5dBm 集成天线 TX峰值电流：18.2mA RX峰值电流：14.3mA 休眠电流： <600nA |
| 蓝牙功能 | 蓝牙智能（低能耗）支持 l2cap，att，gatt，gap和security 蓝牙智能配置文件 从模式和主模式 支持CSRmesh 100Kbps +吞吐量 无线固件升级 |
| 硬件特性 | UART主机表面 spi，i2c，pwm，uart，gpio外围设备 10位adc ios 温度范围：-30℃〜+ 80℃ 4 PWM通道 电源：1.8- 3.6V UFL端口 |
| 操作环境 | 湿度：10％〜90％非冷凝 温度范围：-30ºC至+80ºC |
| 认证 | Rohs |
Customizing is acceptiable!
CSR Mesh!
Smart LED control solution: BLE+ APP can realiztion LED intelligent control. Including LED color control, brightness control, contextual model, music part model, timing etc.
1Support bluetooth mesh, through the mobile phone APP can be grouped lamp and rename;
2Through mobile can be brightness and color control;
3Support contextual model;
4Support music part model and timing.
CSR Mesh!
Smart LED control solution: BLE+ APP can realiztion LED intelligent control. Including LED color control, brightness control, contextual model, music part model, timing etc.
1Support bluetooth mesh, through the mobile phone APP can be grouped lamp and rename;
2Through mobile can be brightness and color control;
3Support contextual model;
4Support music part model and timing.
| Radio Features | Bluetooth 4.0 low energy radio Transmit power: +7.5 dBm Receiver sensitivity: -92.5dBm Integrated antenna TX peak current: 18.2mA RX peak current: 14.3mA Dormant current: <600nA |
| Bluetooth Features | Bluetooth Smart(low energy)support L2CAP,ATT,GATT,GAP and Security Bluetooth Smart Profiles Slave and master mode Support CSRmesh 100Kbps + throughput Over-the-Air firmware upgrade |
| Hardware Features | UART host inferface SPI,I2C,PWM,UART,GPIO peripheral 10-bit ADC IOs Temperature range: -30℃ to +80℃ 4 PWM channel Power supply: 1.8- 3.6V UFL port |
| Operating Environment | Humidity:10%~90% Non-Condensing Temperature Range:-30ºC to +80ºC |
| Certification | Rohs |
