多功能应急车跳跃启动

多功能应急车跳跃启动
深圳市线程技术有限公司在中国的高科技企业,公司开始生产汽车应急电源的真正国有的CE,FCC,ROHS等认证。 多功能应急车跳跃启动
对于车载/手机/平板电脑/笔记本电脑
包装及送货
包装说明:独立包装:PU袋+彩盒
交货细节:7-30days
专利产品5 1多功能
迷你最小最轻
便携式
锂电池
专利设计
12V汽车蓄电池跳跃起动 - EPOWER
产品参数:
尺寸:131 * 75 *25毫米
重量:320克
输出:
5V / 2A; - 手机,平板电脑,PSP,MP3 / MP4。
12V / 2A; - 汽车冷却器..
19V / 3.5A; - 笔记本电脑
迅速启动; - 12V车
LED灯 - (光,爆闪,SOS)
输入:12V / 1A
启动电流:200A
峰值电流:400A
使用说明:
1,选择合适的电压和连接器的电子设备进行充电/供电
2,按下启动时,将设备与EPOWER连接充电开关; 如果你拔掉数据线,自动休眠将开始一分钟。
3,五灯将充电用EPOWER和所有的灯在闪烁,循环将保持光亮,当你的设备处于满充电
4,在充电的设备,LED灯指示内置EPOWER电池的平衡力量。 四灯指示80%的平衡,三灯指示60%的平衡,两个指示灯指示40%平衡和一个指示灯指示20%平衡。 内置电池是空的whenall LED灯开始闪烁
5,按下开关三秒开始如果你想使用LED照明,并选择状态(光,爆闪,SOS,接近)按转换开关。
6,存放于阴凉干燥处,避免阳光直射。
特别说明:
要启动12V汽车,请EPOWERare亮确保至少有三个LED灯先,然后是红色电池夹连接到蓄电池的正极(+)和黑色夹子到电池的负极( - ),然后将插头插入EPOWER,终于 打开点火开关到起始位置。 一旦车辆启动后,请拔下插头,30秒内取出电池夹。
产品亮点:
最小,最轻的跳起动器专利技术在当前的市场。
使用大功率聚合物电池,快速充电和自放电率低,周期可以达到1000次。
支持12V车辆紧急启动,便携照明和各种手机,PSP,MP3 / MP4掌上电脑PDA,笔记本电脑以及其他产品充电/供电;
Multi-function Emergency car Jump Starter
Shenzhen THREAD Technology Co. , Ltd. high-tech enterprise in China, the company started production of automotive emergency power truly a state-owned CE, FCC, ROHS and other certifications. Multi-function Emergency car Jump Starter
For Car/ mobile Phones/ Tablets/ notebook
Packaging & Delivery
Packaging Detail: Individual Packing: PU bag + color box
Delivery Detail: 7-30days
patent product 5 in 1. Multi-functional
Mini smallest lightest
Portable
Lithium battery
Patented design
12V car battery jump starter - EPower
Product parameters:
Size: 131*75*25mm
Weight: 320g
Output:
5V/ 2A; - Mobile phone, Tablet PC, PSP, MP3/ MP4.
12V/ 2A; - Vehicle cooler..
19V/ 3.5A; - Laptop PC
Jump start; - 12V vehicle
LED light - (light, burst flashing, SOS)
Input: 12V/ 1A
Starting Current: 200A
Peak Current: 400A
Instructions for use:
1, Select the appropriate voltage and connector for the electronic device to charge / power supply
2, Press the switch to start charging when your device connected with EPOWER; If you unplug the cable, auto-sleep will start in one minute.
3, Five lights will flash circularly during the charging by EPOWER and all lights will keep bright when your device is full-charged
4, During the charging for your device, LED lights indicate the balance power of built-in battery of EPOWER. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty whenall LED lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6, Store the product in a cool and dry place and away direct sunlight.
Special note:
To start 12V vehicle, please make sure at least three LED lights of EPOWERare bright firstly, then connect the Red battery clamp to the battery Positive (+) and Black clamp to the battery Negative (-) and insert the plug into the EPOWER, finally turn the ignition switch to the START position. Once the vehicle is started, please disconnect the plug and remove the battery clamps within 30s.
Product Highlights:
The smallest and lightest jump starter with patented technology in the current market.
Use high power polymer cells, fast charging and low self-discharge, cycles can reach 1000 times.
Support 12V vehicle for emergency start, portable illumination and various mobile phone, PSP, MP3/ MP4 Pocket PC PDA, notebook as well as other products charge / power supply;


