Security check handhold Metal Detector SPY3003B1

Security check handhold Metal Detector SPY3003B1

安检手持金属探测器SPY3003B1

15-20 USD

加入意向

快速详细信息

  • 原产地:GUA,中国(大陆),中国(大陆)

  • 品牌名称:SPYONWAY

  • 型号:SPY3003B1

  • 产品编号:SPY3003B1

  • 外形尺寸:41 * 8.5 *4.5厘米(L * W * H)

  • 颜色:黑色格力黄色

  • 工作电压:7-9V

  • 净重:409克

  • 工作频率:有22KHz

  • 用法:安全检查

  • 价格:最便宜的最低价格合理

  • 保修:1年

包装及送货

包装细节: 包装细节:40PCS /箱纸箱尺寸:49 * 37 *52厘米重量:16千克
交货详细信息: 3天之内

技术指标

安检手持金属探测器SPY3003B1 1.节约用电2.具有自动连续报警声3.最优惠的价格

安检手持金属探测器SPY3003B1
1.节约用电
2.具有自动连续报警声
3.最优惠的价格




欢迎到深圳

Spyonway电子公司



技术参数:

该SPY3003B / B1我们一个高性能的手持式金属探测器设计,以满足安全行业的具体要求。


操作:


该SPY3003b / B1运行在一个9伏标准或可充电电池。 安装电池,滑开电池盖,将电池放置在其室中,同时匹配+ / -symbols。


打开本机通过按ON / OFF开关,直至其卡上的绿色指示灯亮起。 该探测器目前正在运作虽然增加不敏感调节器直到红色指示灯点亮并且恒定的音频调声。 转灵敏度调节(反时针),直至红色LED刚刚熄灭乐音消失,检测器现在调整以获得最佳的灵敏度和深度范围。

与朝向表面的检测面夹持单元,扫前后连续地10-30mm的的高度以上的区域进行扫描。

金属的存在将被音频警告音并红光来了,如果该检测器被保持静止在金属物体的检测信号将自动减少来指示,因此,重要的是该单元被连续地扫描所述表面时是使用 。




性能:

该检测器的灵敏度,主要由大小,形状和物体的组合物待检测确定。





典型表现数字如下:



最大探测距离:


目的

低灵敏度

最佳灵敏度

38口径手枪

15厘米

20厘米

笔刀

10厘米

15厘米

刀片

15厘米

10厘米




低灵敏度操作:


按; 检测过程中PW灵敏度开关,扫描仪会那么只有做大金属物体响应,如手枪刀等,不会对小金属源作出反应,如硬币,钥匙,帽针等,直到你争不松开低灵敏度开关 低灵敏度的检测。




可充电电池槽:


您可以使用9volt充电电池的探测器电源


它需要四到六小时,电池充满电。 电池充电器插座位于所述检测器的侧面。


注:充电时关掉探测器。




振动器按钮:


该检测器配备有一个振动器按钮也位于检测器的侧面。 震动功能应该在嘈杂的工作环境中还是在地方运营商不希望的声音调听到他周围的地区使用。 按下此键,振动器工作:释放,音频调工作。




笔记:


如果绿灯熄灭完全或不加油,或者该装置正在陌生的声音曲调,单位是不稳定的,不应该被使用,直到电池被充电或更换。


如果该单元未用于一定长度的时间,最好是取下电池,以避免电池,以避免电池泄漏,可能导致与检测器的严重损坏。



1.在一个月的时间,如果你不满意的产品或产品损坏(不是人为),你可以无条件更换。 (关于更改,请联系客服。),退货运费成本是买方的责任。

2.一年保修所有配件和终身服务。

我们产品的质量:

1.首先,我们承诺所有的产品都是全新的。

前2其次,我们考察的质量在出厂,这些包括但不限于规格,外观,功能,包装,配件等。

3.第三,我们以卓越的高品质纸箱包装的产品,以确保完整性和较低的传递损失。

4.如果发​​现任何问题,当收到产品,我们是负责保障服务。

交货时间:

1.我们有成千上万的产品库存。 所以,一旦付款确认,我们将提供您的货物在24小时内。

送货:

1.我们只支持世界著名快递公司(EMS,DHL,UPS,联邦快递),更快速和更安全的航空公司,除了远距离探测器,里面(TX-MPI,VR1000BII,VR长距离王)设定的电池。 为了减少我们的运输费用,大尺寸的文章(演练金属探测门,X光安检机,验针食品工业等)会去远洋运输。

海关:

1.我们将宣布在发票上,它是一个礼物或写下一个较低的价格来帮助你减少税收。

2.但是,你仍然需要交的税的产品,如果海关问。

付款:

T / T通过汇丰银行或西联汇款



产品展示




Quick Details

  • Place of Origin: GUA, China (Mainland) , China (Mainland)

  • Brand Name: SPYONWAY

  • Model Number: SPY3003B1

  • Item No.: SPY3003B1

  • Dimensions: 41*8.5*4.5cm (L*W*H)

  • Color: Black Gree Yellow

  • Operating voltage: 7-9V

  • Net weight: 409g

  • Operating Frequency: 22KHz

  • Usage: security check

  • Price: best lowest cheap reasonable price

  • Warranty: 1 years

Packaging & Delivery

Packaging Details: Packaging Details: 40pcs/ ctn carton size: 49*37*52cm weight: 16kg
Delivery Detail: Within 3 days

Specifications

Security check handhold Metal Detector SPY3003B1 1. Saving electricity 2. With automatic continuous alarm sound 3. best price

Security check handhold Metal Detector SPY3003B1
1. Saving electricity
2. With automatic continuous alarm sound
3. best price




Welcome to Shenzhen

Spyonway Electronics Inc.



Specifications:

The SPY3003B/ B1 us a high performance Handheld Metal Detector designed to meet the exact requirements of the security industry.


Operation:


The SPY3003b/ b1 operates on one 9 volt standard or rechargeable battery . to install the battery , slide off the battery cover and place the battery into its compartment while matching the +/ -symbols.


Turn the unit on by pushing the on/ off switch until it clicks on and the green LED is lit. The detector is now operational although an increase insensitivity adjuster until the red LED is lit and a constant audio tune is heard. Turn the sensitivity adjuster (anti-clock wise) until the red LED just goes out the tone fades, the detector is now tuned for optimum sensitivity and depth range.

Holding the unit with the detection face towards the surface, sweep backwards and forwards continuously at a height of 10-30mm above the area to be scanned.

The presence of metal will be indicated by the audio warning tone and red light coming on, if the detector is held still over a metal object the detection signal will automatically reduce, therefore it is important that the unit is continually scanning the surface when is use.




Performance:

The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected.





Typical performance figures are given below:



Maximum detection range:


Object

low sensitivity

optimum sensitivity

38 caliber hand gun

15cm

20cm

Pen knife

10cm

15cm

Razor blade

15cm

10cm




Low sensitivity operation:


Press the ; pw sensitivity switch during detection, scanner will then only respond to bigger metal objects such as a hand gun knife etc and will not respond to small metal s such as a coin, key, hatpin, etc do not release the low sensitivity switch until you compete low sensitivity detection.




Rechargeable battery socket:


You may use a 9volt rechargeable battery to power the detector


It takes four to six hours to fully charge the battery. The battery charger socket is located at the side of the detector.


Note: turn off the detector when charging it.




Vibrator Button:


The detector is equipped with a vibrator button also located at the side of the detector. Vibration function should be used in noisy work situations or in places where the operator does not wish for the audio tune to be heard in his surrounding area. press this button, vibrator works: release it , audio tune works.




Notes:


If the green light goes out completely or fails to come on or if the unit is making unfamiliar audio tunes , the unit is unstable and should not be used until the battery is recharged or replaced.


If the unit is not to be used for a certain length of time it is advisable to remove the battery to avoid battery to avoid battery leakage which could cause serious damage to the detector.



1. In one month, if you're not satisfied with product or product damaged (Not man-made) , you can change unconditionally. (About changing, please contact customer service.) , return shipping cost is buyer's responsibility.

2. One year warranty for all accessories and lifelong service.

The Quality of Our Products:

1. First of all, we promised that all the products are brand-new.

2. Secondly, we have inspected quality before leaving the factory, those include but not limited to specifications, appearance, function, package, accessories and so on.

3. Thirdly, we package the products by superior high quality carton to ensure the completeness and low delivery loss.

4. If you find out any problem when receive the products, we are in charge of securing service.

Delivery Time:

1. We have thousands of products in stock. So, once payment confirmed, we will deliver your goods in 24 hours.

Shipping:

1. We only support world-famous Express companies (EMS, DHL, UPS, FedEx) , faster and safer by airline, except Long range detectors which set batteries inside (TX-MPI, VR1000BII, VR Long Range King) . For reducing our shipping fee, large size articles (Walkthrough metal detector gates, X-ray security inspection machines, Needles inspection for Food industry, etc) will go Ocean shipping.

The Customs:

1. We will declare on the invoice that it's a gift or write down a lower price there to help you reduce tax.

2. However, you will still need to pay the tax for the products if the customs ask.

Payment:

T/ T through HSBC Bank or Western Union



Products show