国际博物馆协会是BMW OBD2 OBD修复完整的诊断系统。 ICOM ABC支持的编程，诊断和编码。 ICOM ISID ISIS有完整的系统取代宝马GT1，OPS，OPPS诊断工具。

ICOM ISID ISIS ICOM A B C宝马

宝马ICOM宝马ISIS ISID A + B + C，无需软件，不仅仅是硬件

请注意，这ICOM不包含软件，如果你想要购买ICOM的软件，请检查

ICOM软件

ICOM A B C说明

• ICOM答：与车辆OBD功能（连接到ISIS / SSS / ISID与局域网或广域网）

• ICOM乙：与大多数编程端口（连接到大多数车辆/到ICOM-A与USB系统

• ICOM C：老型号系列的发动机舱诊断插座（OBD2）

可选信息：

HS编码：8708零件机动车辆宝马集团ISIS的下一代工具配件3G 2008

3G组件：

综合服务信息服务器（ISIS）两台服务器（一个备份）+ ISTA

综合服务信息显示器（ISID）便携平板设备

综合通信光模块（ICOM）一套车辆接口设备，所有型号的

综合测量接口盒（IMIB）测量接口设备

综合业务接入点（ISAP）向ISIS无线连接

1. ICOM的描述（16PIN接口）

ICOMA是基本成分。 在物理上，这将提供车辆诊断接口OBD II接口，并提供自适应的积分到所需的维修店网络接口。 计算机通过高效的核心，这是负责测试作为协议变换器设备和车辆控制单元，并连接到所需的信号处理的测量技术之间的数据交换。 供电电压由KL30通过车辆接口。 ICOM 8V的最低电压的电气操作的要求。 只有在电源电压超过最低限度，以确保一个稳定的功能

2. ICOM B功能（MOST接口）

ICOM B为外部ICOM最（多媒体传输系统）接口。 它是通过USB数据线与通过USB接口所提供的ICOM一个国际博物馆协会A.电源电压连接。 只有当最低了ICOM 8V的电源电压，当，ICOM B.将只准备通过一个标准的ICOM乙MOST接口上运行的车辆电气方面。

3. ICOM C函数（20PIN接口）

ICOM C是一个智能接口转换器，允许OBD II插槽和宝马轮比赛。 作为辅助模块的延长，它会ICOM A和非OBD II车辆接口连接。 从圆形插座由KL30提供的车辆侧的电源电压。 ICOM 3C电气操作提供8V的最低电压。 KL30上发送到OBD II设备上的内部的电压，从而ICOM的电源。 只有当车辆？的电池电压超过所述最小限制，以确保两个设备进行交互的稳定性。

4. ICOM一个延长线（16PIN接口延长线）

ICOM一个是由于不同型号，不同型号和自己的体重，直接连接OBD-II诊断块很容易受到损失和接触不良，使用延长线，连接可靠，使用更方便。

ICOM / ISIS / ISID宝马新的探测器（离线编程支持）BMW ICOM / ISIS（包括电脑，一套完整的配置，离线编程支持，诊断）。

ICOM is obd2 repair OBD complete diagnostic system for bmw. ICOM A B C support programming, diagnosing and coding. ICOM ISID ISIS have full system replace B-M-W GT1, OPS, OPPS diagnostic tool.

ICOM ISID ISIS ICOM A B C for BMW

B-M-W ICOM B-M-W ISIS ISID A+B+C without software, just hardware

Please NOTE this ICOM does not contain software, if you want buy ICOM with software, please check

ICOM with software

ICOM A B C description

• ICOM A: Vehicles with OBD capability (Connect to ISIS/ SSS/ ISID with LAN or WAN)

• ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system

• ICOM C: Older model series with diagnosis socket in engine compartment (OBD2)

Optional Information:

HS Code: 8708 Parts and Accessories of the Motor Vehicles BMW Group ISIS Next Generation Tools 3G 2008

3G Components:

Integrated Service Information Server (I S I S) two servers (one backup) + ISTA

Integrated Service Information Display (ISID) portable tablet device

Integrated Communication Optical Module (ICOM) set of vehicle interface devices-all models

Integrated Measurement Interface Box (IMIB) measurement interface device

Integrated Service Access Point (ISAP) for wireless connection to ISIS

1. ICOM A description (16PIN interface)

ICOMA is the basic component. In physical terms, it would provide the vehicle diagnostic interface OBD II interface, and to provide adaptive integration to the repair shop network interfaces required. Computer through an efficient core, which is responsible for testing as a protocol converter device and vehicle control unit and connected to the data exchange between the measurement techniques required for signal processing. Supply voltage by KL30 by vehicle interface. ICOM A requirement of the electrical operation of a minimum voltage of 8V. Only the supply voltage exceeds the minimum limit in order to ensure a stable function

2. ICOM B function (MOST interface)

ICOM B is the external ICOM A MOST (Multimedia Transmission System) interface. It is through the USB cable to connect with ICOM A. Supply voltage provided by ICOM A through USB. Only when the lowest of the ICOM A supply voltage of 8V, when, ICOM B would only be ready to run the electrical side of the vehicle through a standard ICOM B MOST interface.

3. ICOM C function (20PIN interface)

ICOM C is an intelligent interface converters that allows OBD II socket and BMW round match. As the lengthening of the auxiliary module, it will ICOM A and non-OBD II vehicle interface connections. Supply voltage from the vehicle side of the circular socket by KL30 provided. ICOM C electrical operation provides for a minimum voltage of 8V. KL30 on the voltage sent to the OBD II device on the inside, and thus to ICOM A power supply. Only when the vehicle?s battery voltage exceeds the minimum limit in order to ensure stability of the two devices interact.

4. ICOM A Extension Cable (16PIN Interface extension cord)

ICOM A was due to different models and different models and their own weight, a direct connection OBD-II diagnostic blocks are susceptible to loss and poor contact, the use of extension cords, connecting reliable, easier to use.

ICOM / ISIS / ISID B-M-W new detector (off-line programming support) B-M-W ICOM / ISIS (including computers, a complete set of configuration, support for off-line programming, diagnostics) .