喷射式制冷及温瓶机

产品描述

本机用于碳酸饮料，果汁，茶饮料生产线，使热灌装饮料85℃的温度降低到35℃-40℃或冷灌装饮料可达30℃。其工作过程可分为3个阶段， 循环热水喷淋，温水预冷，冷水冷却，这是适合于冷却各种瓶和罐头果汁和碳酸beverage.It装备与'莱克斯诺'（美国名牌）链plate.The主体由 优秀的不锈钢，运行可靠，在一个美丽的外观。

容量：2,000BPH-24,000BPH

产品特点：

温瓶机是不错的选择塑料瓶，玻璃瓶和易拉罐饮料灌装线。

因为碳酸软饮料一般采用低温（2℃，5℃）填充，但车间的环境温度要高得多，所以很容易在瓶子表面结露水，这将带来麻烦下游的标签。 特别是，如果使用的包装，露水会让纸箱湿造成严重损害。 因此，灌装机之后，它是必要使用奶瓶加热器到瓶加热到环境温度。 温暖的是隧道式的淋浴设备它通过喷洒热水换热加热瓶。 它通常有3个温区（多个区域是可能的）。 通过部分加热后，该瓶的温度能达到环境温度，通常设计为30-35ºC。 奶瓶加热器主要由机座，输送链，传输系统，蓄水水槽，循环泵，喷淋装置，加热装置和管道。 器可采用蒸汽板式换热器和电子式热交换器。

该暖奶器的目的是增加瓶子的温度，以冷灌装后，瓶子取出冷凝水，所以一定要确保集装箱的表面粘贴标签的便利性，并确保瓶子是干燥和清洁的时候放入纸箱 同时保持不变饮料的风味和营养。

详细图片：

售后服务：

1.一年保修，技术支持的整个生命。

2.安装，如果买家有需要，我们可以派技术人员到买方的公司安装的设备，而买方应支付的费用（如机票和住宿）。 您也可以发送你的员工，我公司研究如何使用机器。

我们的公司与服务：

Fillex公司的主要产品包括：全套生产线，如灌装机碳酸饮料，矿泉水，纯净水，果汁，牛奶，酒，食用油等，桶灌装机及水处理各种系列设备 对于饮用水，矿泉水，纯净水等设备

我们的服务
（1）我们可以派遣我们的工程师（县）你身边的安装和调试机器，但是我们的工程师（S）交通津贴，以及住宿和伙食费，应在你的身边进行充电。
（2）本机的质量，我们卖的是保证1年。
（3）我们将提供您身边的备用配件保修一年，长期内易受损的部件
时间的技术支持。

常问问题：
Q1：你是一个贸易公司或制造商？
A1：我们有自己的工厂工作多年，可以给ü最好的服务。

Q2：你保证或质量的，如果我们买你的机器的保修吗？
A2：我们为您提供高品质的机器1年的保证。 我们会给ü零部件的免费1年，
生活服务后不久。 这其间，我们的工程师去50多个国家进行调试，拥有丰富的经验。

Q3：我什么时候可以拿到我的机器我付出后？
A3：我们将提供有关的日期，我们同意两侧的时间机器。

Q4：如何安装我的机器，当它到达？
A4：我们会尽快为你得到所有你的机器准备把我们的工程师给你的身边，进行测试
并教你的技术如何运行的机器。

Q5：什么是送货时间？
A5：在T / T定金或L / C后的30-45天。

Q6：什么是最小起订量？
A6：1个单位

Spray Cooler&Bottle Warmer

Product Description

This machine use for carbonated drink,juice,tea beverage production line,make the temperature of hot filling drink 85℃ down to 35℃-40℃ or the cold filling drink up to 30℃.Its working process can be divided into 3 stages,circulating hot water spray,warm water pre-cooling,cool water cooling,It is suitable for cooling all kinds of bottle and canned juice and carbonated beverage.It equips with 'Rexnord'(American famous brand)chain plate.The main body is made of excellent stainless steel,running reliable and in a beautiful appearance.

Capacity:2,000BPH-24,000BPH

Features:

Bottle Warmer is good choice plastic bottle, glass bottle and cans beverage filling line.

Because carbonated soft drink usually adopts low-temperature (2ºC-5ºC) filling, but ambient temperature of workshop is much higher, so it is very easy to condensed dew on bottle surface which will bring trouble to the downstream as labeling. Especially, if using packing, the dew will make carton wet to cause serious damage. Therefore, after the filling machine, It is necessary to use a bottle warmer to heat the bottle to the ambient temperature. The warmer is tunnel type showering equipment which heats the bottle through spraying hot water for heat exchange. It usually has 3 temperature zones( more zones are possible). After heated by section, the bottle's temperature could achieve ambient temperature, usually design for 30-35 ºC. Bottle warmer is mainly composed of machine base, conveying chain, transmission system, water storage flume, recycle pump, showering device, heating device and pipes. Exchanger could adopt steam plate type exchanger and electrical type exchanger.

The purpose of the bottle warmer is to increase bottle temperature so as to remove condensed water from bottle after cold filling, so make sure the containers' surface for the convenience of sticking tags and to ensure the bottles are dry and clean when put into carton boxes while maintaining the flavor and nutrition of the beverage unchanged.

Detailed Picture:

After Sale Services:

1. One year warranty, technical supports the whole life.

2. Installation,If buyer need, we can send technical people to buyer's company to install the machine, while buyer should pay the cost (such as ticket and accommodation). You can also send your workers to my company to study how to use the machine.

Our Company&Services:

The Major products of Fillex company include various series equipments of full set of production lines such as bottle filling machines for carbonic acid beverage, mineral spring water, pure water, juice,milk, wine,cooking oil and etc, barrel filling machines and water treatment equipments for drinking water, mineral water, pure water and etc.

Our Services
(1) We can dispatch our engineer(s) to your side for installing and debugging machines, but our engineer(s) traveling allowances , as well as lodging and board expenses, shall be charged at your side.
(2) The machine quality that we sell is guaranteed 1 year.
(3) We shall provide your side spare accessories for easy-damaged parts within warranty year and long
time technical support.

FAQ:
Q1:Are you a trading company or a manufacturer?
A1:We have our own factory for many years,can give u best service .

Q2:What's your guarantee or the warranty of the quality if we buy your machines?
A2:We offer you high quality machines with 1 year guarantee . we will give u spare part free in 1 year,
Life long after service. Mean while, our engineers go more than 50 countries for debugging, with rich experience.

Q3:When can I get my machine after I paid?
A3:We will deliver the machines on time as the date we agreed both side.

Q4:How can I install my machine when it arrives?
A4:We will send our engineer to your side as soon as you get all your machines ready , for testing
and teaching your technicians how to run the machines.

Q5:What's the delivery time?
A5:30-45 days after the T/T deposit or L/C.

Q6:What's min order quantity?
A6:1 unit