工作过程

然后瓶被转移到通过撬拨瓶星轮灌装机。 瓶子是保持由颈部保持板后它是在灌装机。 灌装阀上升和下降通过凸轮的作用。 它适用于压力灌装方式。 当灌装阀下降，触动千斤顶，它打开并且完成填充过程中，在完成时，灌装阀上升并离开瓶而将瓶子转移到通过过渡星轮钳制瓶子颈部封盖机。

停止旋刀夹的瓶颈，保持直立瓶，防止营业额。 该旋盖头保持在旋转的方法和旋转，在摄像头的动作; 它完成整个封盖过程，包括接球，压，拧，排等成品瓶从螺旋转移到输出瓶链通过戳轮封盖机和叶三的多功能一体机。

冲洗部分：

颈部的控制与对gripper.Water经销商联合食品级橡胶板和SUS304 cover.Spraying注入设计的塑料卡扣，可以完全清洗瓶子。

灌装部分：

整个填料是重力灌装system.High准确SUS304L建设灌装喷嘴，确保高精度灌装液位SUS304液体的碗，和管道系统。

旋盖部分：

将旋盖系统。 全自动瓶盖安排，喂食。

无瓶不盖delivery.Automatic停止时，缺少一瓶。

The working course

Then bottle is transferred to filling machine through poking bottle star-wheel. The bottle is hold by neck holding plate after it is in the filling machine. The filling valve ascends and descends by the action of cam. It applies pressure filling method. When filling valve descends and touches bottle jack, it opens and finishes the filling course, when finished, the filling valve ascends and leaves the bottle while the bottle is transferred into capping machine through transition star-wheel that clamps bottle neck.

The stop screwing knife clamps bottleneck, keeps bottle upright and prevent turnover. The screw capping head keeps in circumrotation and rotation, under cams action; it finishes whole capping course including catching, pressing, screwing, discharging etc. Finished bottle is transferred onto output bottle chain from screw capping machine through poking wheel and leaves three-in-one machine.

Rinsing part:

Neck Control with plastic snap on the gripper.Water distributor combined with Food Grade Rubber plate & SUS304 cover.Spraying inject design, can completely washing the bottles.

Filling part:

The entire filler is gravity filling system.High accurate SUS304L construction filling nozzle, make sure high accurate filling level SUS304 liquid bowl, & pipeline system.

Capping part:

Place & capping system. Automatic caps arranging, feeding.

No bottle no caps delivery.Automatic stop when lack of bottle.