Isolated Car Charger with 11V to 15V DC Input Voltages and High Reliability
带11V至15V直流输入电压和高可靠性的隔离式汽车充电器
议价
加入意向- 特征：
- 适用于电池充电器
- 通用交流输入全量程
- 保护：短路/过载/过电压
- 双色LED负载指示灯
- 反馈和CC模式保护
- 产品规格：
- 输入电压：90〜264VAC
- 输入频率：47到63Hz
- 输入电流：最大0.4A
- 浪涌电流：最大80A（冷启动）
- 效率：g65％
- 保持时间：标称线路最小10ms
- 输出电压：7〜27V DC
- 纹波和噪声：最大2％p-p
- 过载保护：输出额定电流5％，恒流限制，自动恢复
- 耐电压：I P-O / P：3000V AC
- 漏电流：最大0.25mA
- 工作温度：-20〜40°
- 存储温度：-40至85°
- 保护：OVP，OLP反馈和短路
- 安全标准：
- iec / ul / en60950-1，cb
- EMC标准：（EN55022 CISPR22，FCC第15部分）B类
- en61000-3-2，-3-3，en61000-4-2，3，4，5，6，8，11
- 标准输出连接器：直流筒插孔
- 标准输出电缆长度UL2468，＃20AWG / 5Ft
- 模型输出输出可工作输出
- 数字电压电流电压范围
- （vdc）（a）（vdc）瓦特
- fca015-s15-z ... 13〜16..0.92〜0.75..65〜100％of von .... 12w
- 注意：1. Von：无负载时的Vout。
- 2. Z =交流进线类型代码。
- Z = 8，IEC320 C8; Z = U，US插头; Z = E，EU插塞; Z = A，Australianplug
- Z = B，英国插头;
- Z = N，不可拆卸电源线类型（NA，NU，NE，NB）
- VSPD：隔离车载充电器
- Features:
- Suitable for battery charger
- Universal AC input fully range
- Protections: short-circuit/overload/over voltage
- Dual color LED loading Indicator
- Feedback and CC mode protection
- Specifications:
- Input voltage: 90 to 264VAC
- Input frequency: 47 to 63Hz
- Input current: 0.4A maximum
- Inrush current: 80A maximum (cold start)
- Efficiency: g65%
- Hold-up time: 10ms minimum at nominal line
- Output voltage: 7 to 27V DC
- Ripple and noise: 2% p-p maximum
- Overload protection: output rated current 5%,constant currentlimiting, auto-recovery
- Dielectric withstand: I P-O/P: 3000V AC
- Leakage current: 0.25mA maximum
- Operating temperature: -20 to 40°
- Storage temperature: -40 to 85°
- Protections: OVP, OLP feedback and short-circuit
- Safety standards:
- IEC/UL/EN60950-1, CB
- EMC standard: (EN55022 CISPR22,FCC part 15) class B
- EN61000-3-2, -3-3, EN61000-4-2, 3, 4, 5, 6, 8, 11
- Standard output connector: DC barrel jack
- Standard output cable length UL2468, #20AWG/5Ft
- Model Output Output Workable Output
- Number Voltage Current Voltage Range Max.
- (VDC) (A) (VDC) Watts
- FCA015-S15-Z...13~16..0.92~0.75..65~100% of Von....12W
- Note: 1. Von: Vout at no load.
- 2. Z = AC inlet Type code.
- Z=8, IEC320 C8; Z=U, US plug; Z=E, EU plug; Z=A, Australianplug
- Z=B, British plug;
- Z=N, Non-detachable power supply cord type (NA, NU, NE,NB)
- VSPD: Isolated Car Charger
