除油剂粉HB-6

HB-6是一种低泡碱性脱脂粉。 脱脂剂含有很强的渗透力的表面活性剂，它可有效地使用于钢，铁金属。 铝和铝合金油去除和除油之前电镀，电泳，绘画等。 脱脂剂适用于浸泡和超声波清洗，尤其是能善于喷洒清洁以其优良的低泡性能。 此外，它具有防止金属产品workstage期间生锈能力强。

清洗方法： 浸渍，喷涂，手动清洁，超声波，等等。
温度：室温至100℃
浓度：0.5〜3％（重量％）溶液并加入水或自来水的其余部分
使用时间：0.5分钟〜8分钟，根据自己的要求，适当调整
后处理方法：清水或自来水冲洗

性能及特点

无臭： 气味淡或无味
大疱性低：少泡沫，后处理简单
低可燃性：不易燃，不易爆，使用安全
生物降解性：污水处理设备可用微生物处理
环保：不含重金属物质和磷酸盐

注意：在使用

连续使用，较低的有效浓度所需的常规含糖量巴斯脱脂剂来控制浓度范围内使用的技术。

包装与贮存

塑料桶：50KG /桶
贮存于阴凉干燥处，避雨亭存储。

在这里给出仅供参考，请检查其适用性

Degreaser powder HB-6

HB-6 is a low foam alkaline degreasing powder. The degreaser contains strong penetration surfactant, and it can be effectively used for steel, iron metal . aluminum and alloy oil-removing and degreasing before electroplating, electrophoresis, painting and so on. The degreaser is appropriate for immersing and ultrasonic cleaning, especially can be good at spraying cleaning for its excellent low foam performance. Also it has good ability for preventing metal products from rusting during workstage.

Cleaning Method: dipping, spraying, manual clean, ultrasonic, etc.
Temperature: room temperature to 100 ° C
Concentration: 0.5 ~ 3% (wt%) Solution and the rest of adding water or tap water
Usage time: 0.5 min ~ 8min, according to their own requirements, as appropriate adjustment
Post-processing methods: water or tap water rinse

Performance and Characteristics

No stinky: odor desalination or tasteless
Bullous low: less bubble, post-processing simple
Low flammability: non-flammable and difficult to explosions, the use of safety
Biodegradable: sewage treatment equipment available microbial treatment
Environmental protection: does not contain heavy metal material and phosphate

Note on use

Continuous use, the lower the effective concentration required regular sugar content of the Bath degreasing agent to control the use of technology in the concentration range.

Package and Storage

Plastic barrels: 50kg / barrel
Store in cool dry place, rain shelters storage.

The information herein is given for reference only, please check its applicability