30-200l Vacuum Emulsifying Machine Zjr30-200
30-200l真空乳化机Zjr30-200
议价
加入意向| 该材料加热并混合在水锅和壶油要完全反应。 吸入到乳化锅byvacuum泵，该材料通过的中心刀片和侧面刮板，其工作在墙壁上都进行搅拌。 在叶片的搅拌的过程中，材料被连续地压碎，挤压，折叠。 然后，所述材料被发送到截止混合直至在那里它们被最后碾成为200μm 〜 2μm的小颗粒。 因为在乳化锅的真空的除，搅拌和混合过程中从材料吸出过程中产生的气泡。 HTTP ： //www.fill-nuoya.com/ |
| The materials are heated and mixed in water pot and oil pot to be fully reacted. Sucked into emulsifying pot byvacuum pump, the materials are stirred by both the center blade and side scraper, which works on the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, folded. Then, the materials are sent to the cut-off mixing until where they are finally crushed into small pellets of 200μm~2μm. Besides, because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material. http: //www.fill-nuoya.com/ |
