Cosmetic Making Machine
化妆品制作机
议价
加入意向| 材料是加热和混合型壶的水和油的锅，以充分反应。通过真空泵吸进乳化锅，材料被打动这两个中心叶片和侧刮板，该作品在墙上。在叶片搅拌，材料是不断粉碎、 压、 折叠。然后，将材料发送到停产待在那里最后成 200 微米的小颗粒压碎搅拌 ~ 2 μ m。此外，由于真空乳化锅中，搅拌和混合过程中产生的气泡被吸出从材料。http: / / www.fill-nuoya.com/ |
| The materials are heated and mixed in water pot and oil pot to be fully reacted. Sucked into emulsifying pot by vacuum pump, the materials are stirred by both the center blade and side scraper, which works on the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, folded. Then, the materials are sent to the cut-off mixing until where they are finally crushed into small pellets of 200μm~2μm. Besides, because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material. http: //www.fill-nuoya.com/ |
