用于Hellen和Heath的40通道DJ设备，GL2400-440，音频混频器

产品规格：
◆产品描述：
现场声音
35年英国Allen和Heath公司在世界上设计一个实用的音频混音设备及其出色的性能，功能和质量建设赢得了广泛的赞誉
GL2400是我们集团4版本的最新产品，也是非常成功的产品
使用现代工程技术设计一个新的GL2400，这个独特的小但强大的性能混音器，我们在设计的每一个细节，以更好地反映调谐效果

◆产品配置：
Hellen和Heath GL2400
16，24，32，40通道结构
左右声道/主声道输出
4可以平移控制组
6-aux发送通道，其中每个通道配有推子前/后切换
2立体声通道，每个通道配有麦克风和双立体声线路输入
7x4矩阵
独特的双功能FOH和监听聆听调谐
单声道可配置为LR sum，或调谐器通道监听扬声器
可以通过通道直接输出记录
具有电平微调和公共输入矩阵外部输入
立体声输入通道可以独立分配给左右声道
立体声通道麦克风输入可以将补丁交叉到矩阵中
4段均衡器，2段均衡器
100Hz高通滤波器
单独幻象电源和极性切换
专用立体声主输出和监听表
内部跳线，可选EQ /后辅助输出，直接输出等选项
所有推子静音，米和AFL
内部通信信号通道可供选择
1kHz振荡器/粉红噪声发生器
录音机可以连接到左右声道，并聆听该声道
耳机插座和本地监视器输出
+ 26dBu电子平衡XLR输出电路
74dB前置放大器可接受高达+ 34dBu麦克风或线路电平输入
超低噪声混频hea-way，40路可选
6通道AUX辅助输出放大器设计
内部电源带MPS12备用电源和插座（16-32通道型号）
您可以使用RPS11电源外部电源，除了提供RPS11备用电源插座（40通道型号）
粉尘100mm推子
内螺纹紧固电位器式电路板分离安装工艺
副可用于添加混合器与Sys-Link V2控制台输入链接
4针XLR灯座LED照明灯具
技术参数通过麦克风输入（带48V幻象电源）14路，22路，30路，38路可选
4线输入（两个立体声）
6主输出通道（包括4个子组输出）
16通道推子，24路，32

40-channel DJ equipment for Hellen and Heath, GL2400-440, audio mixer

Specifications:
◆ Product description:
Live sound
35-year United Kingdom Allen and Heath companies in the world to design a practical audio mixing equipment and their outstanding performance, functionality and quality construction won wide praise
GL2400 is the latest product of our group 4 version, it is also very successful product
Using modern engineering techniques to design a new GL2400, this unique small but powerful performance mixer, we are in every detail of the design in order to reflect better the tuning effect

◆ Product configuration:
Hellen and Heath GL2400
16, 24, 32, 40-channel structure
Left and right channel/main channel output
4 can pan control group
6-aux sends channels, where each channel is equipped with pre-fader/post switch
2-stereo channels, each channel is provided with a microphone and dual stereo line input
7x4 matrix
Unique dual function FOH and monitor listen tuning
Single channel can be configured as LR sum, or tuner channel monitor speakers
Can be recorded over channel direct output
With level trims and common input matrix external inputs
Stereo input channel can be independently assigned to the left and right channels
Stereo channel mic inputs can cross patch into matrix
4-segment EQ, 2 sweep EQ
100Hz high-pass filter
Individual phantom power and polarity switching
Dedicated stereo master output and monitor meters
Internal jumper, before optional EQ/rear auxiliary output, direct out and other options
All faders Mutes, meters and AFL
Internal communications signal channels to choose from
1kHz oscillator/pink noise generator
Recorder can be connected to left and right channel and listen to the channel
Headphone sockets and local monitor outputs
+ 26dBu electronically balanced XLR-output circuit
74dB preamplifier acceptable up to + 34dBu microphone or line-level inputs
Ultra low noise mix hea-way, 40-way optional
6-channel AUX auxiliary output amp design
Internal power supply with MPS12 backup power supply and socket (16-32 channel models)
You can use RPS11 power supply external power supply, in addition to providing RPS11 backup power outlet (40-channel models)
Dust 100mm fader
Female screw fastening potentiometer type circuit board separation installation process
Deputy available for adding mixer with Sys-Link V2 console input link
4-pin XLR lamp socket LED lighting lamps
Technical parameters via microphone input (with 48V phantom power) 14 Road, 22 Road, 30-road, 38-road optional
4-line inputs (two stereo)
6-main output channel (including 4-subgroup outputs)
16-channel faders, 24-way, 32