APF active power filter with three-phase unblance compensation

APF active power filter with three-phase unblance compensation

APF有源电源滤波器具有三相无冲击补偿

2+
1500-6000 USD

加入意向
  • HKK-APF（1）有源电力滤波器
  • 技术参数
  • 项目：400V ---- 025/035/050/060/100/150
  • 系统参数
  • 额定输入线电压：380V（-40％〜20％）
  • 并联单元：无限
  • 整体效率：≥97％
  • 电网结构：三相三线，三相四线
  • 电流互感器：150/5〜10000/5
  • 电路拓扑：三电平
  • 绩效指标
  • 额定容量：25A / 35A 50A / 60A 100A 150A
  • 谐波补偿：受支持
  • 补偿：支持
  • 不平衡补偿：支持
  • 过滤范围：2〜50次
  • 过滤器时间选择：从2到50次选择
  • 过滤度：可随意调整，从2到50次
  • 滤波性能：THDi（总谐波失真）<5%
  • 快速响应时间： <50us
  • 总响应时间： <5ms
  • 目标功率因数：可从-1〜1调节
  • 控制算法：FFT算法，智能FFT算法，即时反应算法
  • 开关频率：20Khz
  • 智能空气冷却：：75L / Sec / 151L / Sec / 300L / Sec / 380/760/1140/1520
  • 噪声级： <56dB
  • 通信监控能力
  • 通讯接口：Rs485，网络连接
  • 通讯协议：总协议电，Modbus协议，TCP / IP
  • 模块化显示界面：LCD多功能触摸彩色屏/ LCD彩色屏; LED指示灯
  • PC端软件：是，所有参数可通过PC设置
  • 保护功能：过压保护，欠压保护，短路保护，逆变桥反向保护，过补偿保护等
  • CT监控和报警：是
  • 故障报警：可用。最大报警记录为500
  • 监控：支持集中监控
  • 机械特性
  • 安装方法：壁挂式/机架式（150AHKK-APF仅提供机架安装型）
  • Dim。（mm3）440x470x150 / 440x590x190 / 440x600x230 500x510x270
  • nw：18kg / 35kg 36kg / 48kg
  • 颜色：黑色细腻和质感
  • CT布线方式：支持电源侧和负载侧
  • 环境条件
  • 海拔：1500〜4000m之间≤1500，根据国家标准GB / T3859.2，每增加100m，功率减少1％
  • 工作温度：-10-40°C
  • 相对湿度：5-95％，无结露
  • 防护等级：IP20，其他额定值可根据要求提供
  • 标准合规性：IEE519，IEC61000-3-6，ERG5 / 4



  • HKK-APF (1) Active power filter
  • Technical parameters
  • Item: 400V ----025/035/050/060/100/150
  • System parameters
  • Rated input line voltage: 380V (-40%~20%)
  • Parallel connected units: Unlimited
  • Overall efficiency: ≥97%
  • Grid structure: Three-phase three-wire , three-phase four-wire
  • Current transformer: 150/5 ~10000/5
  • Circuit topology: three-level
  • Performance indicator
  • Rated capacity: 25A/35A 50A/60A 100A 150A
  • Harmonic compensation: Supported
  • Compensation: Supported
  • Unbalance compensation: Supported
  • Filtering range: 2nd~50th order
  • Filter times selection: Select at will from 2nd to 50th order
  • Filtering degree: Adjustable at will from 2nd to 50th order
  • Filtering performance: THDi(total harmonic distortion )<5%
  • Quick response time: <50us
  • Total response time: <5ms
  • Target power factor: Adjustable from -1~ 1
  • Control algorithm: FFT algorithm, intelligent FFT algorithm, instant reactive algorithm
  • Switching frequency: 20Khz
  • Intelligent air cooling: : 75L/Sec/151L/Sec/300L/Sec/380/760/1140/1520(L/Sec)
  • Noise level: <56dB
  • Communication monitoring capability
  • Communication interface: Rs485, internet access
  • Communication protocol: Total agreements of electricity ,Modbus protocol ,TCP/IP
  • Modular display interface: LCD multifunction touch color screen/LCD color screen; LED indicator lamp
  • PC end software: Yes, all parameters can be set through PC
  • Protection functions: Overvoltage protection, under-voltage protection, short-circuit protection, reverse protection of inverter bridge, overcompensation protection & more
  • CT monitoring and alarm: Yes
  • Failure alarm: Available . maximum alarm logging is 500
  • Monitoring : Support centralized monitoring
  • Mechanical characteristics
  • Installation method: Wall -mounted/rack-mounted (150AHKK-APF provides rack-mounted type only )
  • Dim.(mm3) 440x470x150/440x590x190/440x600x230 500x510x270
  • NW.: 18KG/35KG 36KG/48KG
  • Color: Black fine and texture
  • CT wiring method: Support power side and load side
  • Environment conditions
  • Altitude: ≤1500mbetween 1500and 4000m, power will reduce by 1% for every increase of 100m according to the national standard GB/T3859.2
  • Operating temperatures: -10-40°C
  • Relative humidity: 5-95%, no dew
  • Ingress protection rating: IP20, other ratings are available at request
  • Standard compliance: IEE519, IEC61000-3-6, ERG5/4