WFQ Series Horizontal Type High-speed Automatic Slitting machine(Separating and cutting machine)

WFQ Series Horizontal Type High-speed Automatic Slitting machine(Separating and cutting machine)

WFQ系列卧式高速自动分切机（分切机）

议价

加入意向
用途：本机适用于分切等各种轧辊mateiale如BOPP，PEL，CPP，CPE，PVC，铝箔，纸张等，并且可以切割边缘，根据生产过程中的不同要求，分切物资。
性能及特点：
1，可自动纠正端面的凹凸或薄膜或纸张上的偏差
2.采用质量上乘的光电开关，LPC纠偏控制系统，它使准确的校正。
3.具有自动计米器，它将完成了本号码时自动停止。
4，圆刀装置可以分离和350K /平方米或低于切入ROOL纸。
5.空气轴用于卷绕和退绕，这是方便装卸
6.自动吸装置，废边。
7.退绕一部分由张力控制; 卷绕部分是驱动器由两个磁粉离合器和协调的主电机控制。
HTTP：//www.zhux​​inmachinery.com

Use: This machine is suitable for separating and cutting such various roll mateiale as BOPP, PEL, CPP, CPE, PVC, aluminium foil and paper, etc, and can cut edge, separate and cut materiel according to different requirements during production.
Performance and Characteristics:
1 It can automatically rectify the unevenness of the end face or the film or paper with pattern deviation
2. Adopting superior quality photoelectric switch, LPC deviation-rectifying control system, it makes accurate correction.
3. With automatic metre counter , it will stop automatically when reaching the present number.
4. The round knife device can separate and cut rool paper of 350k/ m2 or below.
5. Air shaft is used for winding and unwinding, which is convenient to load and unload
6. Automatic suction device for waste edge.
7. the unwinding part is controlled by tension; the winding part is drive by two magnetic powder clutches and coordinated controlled by main motor.
http: //www.zhuxinmachinery.com