Wholesale Clear 10x25 Laser Rangefinder Binocular Telescope

Wholesale Clear 10x25 Laser Rangefinder Binocular Telescope

批发清除10X25激光测距仪双筒望远镜

89.55 USD

加入意向

高品质清除10X25激光测距仪双筒望远镜

光学
型号:10X25
放大倍率:6X
物镜:25毫米
出瞳直径:4毫米
视野:122米/ 1000 M&133码/千码
涂层类型:多层镀膜光学
棱镜类型:Bak的4屋脊棱镜
对焦系统:目镜调焦
测距仪
激光类型:1级(人眼安全)
激光波长:905nm
测量范围:5-700m
精度:正常条件+
米/码显示:有
杂项
电池:CR2电池DC3V
“电池电量不足”指示灯:是
显示:LCD指示灯
重量:240克
Dimensiopns:75X40X110mm
注意:
1.按下电源按钮打开电源。
2.按下MODE按钮来改变“米”到“围场”。 动态DATAS切换功能接收数据时,按住“模式”按钮,切换单位并自动转换数据和实时显示。
3.按“动作/打开”按钮一次,并开始测距1,在循环模拟激光闪烁标志右上角,表示正在lanching激光,数据显示,测量的按钮。 距离演出“ - ”4个短横线,这一目标无法测得太远了。 数据显示,将保持到自动的电源的下一步操作。
4.当电池电量不足时,在左上角会显示电池符号,电池需要更换。
5.在主界面,电源就没有操作automically约30秒后熄灭。

High Quality Clear 10x25 Laser Rangefinder Binocular Telescope

Optics
Model: 10x25
Magnification: 6X
Objective lens: 25mm
Exit pupil diameter: 4mm
Field of view: 122m / 1000 m & 133 yards / 1000 yards
Type of coating: fully multi-coated optics
Type of prism: Bak 4 roof prism
Focus system: Eyepiece focusing
Ranger finder
Laser type: class 1 (eye safe)
Laser wavelength: 905nm
Measuring range: 5-700m
Accuracy: Normal condition+
Meters/ Yards display: Yes
Misc
Battery: CR2 Battery DC3V
'Low battery' indicator: Yes
Display: LCD indicator
Weight: 240g
Dimensiopns: 75X40X110mm
Note:
1. Depress the power button to turn the power on.
2. Depress the mode button to change 'Meters' to 'Yards'. Dynamic datas switching function receive data, hold down the 'Mode' button, switch units and automatically convert data and real-time show.
3. Press the 'action/ on' button one time, and begin ranging 1, the top-right corner of a simulated laser flashes signs in the loop, said it is lanching laser, the data show that measurement is in the button. Distance show '-' 4 short horizontal line, that goal can't be measured too far back. Data show that will remain until the next operation of the power of automatically.
4. When the battery is running low, in the upper left corner will display a battery symbol, that the battery should be replaced.
5. In the main interface, power supply will be no operation automically after about 30 seconds off.