Wireless Bluetooth Game Controller for Android Phone
无线蓝牙游戏控制器为Android手机
基本信息。
产品型号：为Android手机
应用：安卓手机
类型：键盘
颜色：黑色和白色
适用型号：所有Android手机2.3以上系统
出口市场：北美，南美，东欧，西欧
附加信息。
包装：零售泡罩包装的每一个
标准：全新品质
产地：中国广州
生产能力：10000PCS每月
产品描述
无线蓝牙游戏控制器为Android手机
介绍
本产品是无线蓝牙控制研究，这是专为Android系统，与Nibiru的软件，无需安装任何额外的驱动程序和设置，连接可直接使用。
（1）内置锂电池，可以长期使用，安全性和稳定性;
（2）随着伸缩支架，可以把支架中的手机，方便游戏中使用（5.5英寸手机最大支持）;
（3）支持蓝牙3.0无线传输功能，您可以使用蓝牙控制器在6-8米之间的距离;
（4）人性化的软件设计，可以进入省电不连接状态模式;
（5）支持到Android 2.3以上系统;
使用手册
1.下载软件：下载Nibiru的APK文件
2.软件登记：运行Nibiru的客户端，有三种方法来注册，激活建议使用二维码注册，报名时必须联网，先注册，永久的影响（二维码注册了三个设备）;
3.连接
1）点击图标句柄Nibiru的软件
2）在设备管理界面中，单击添加新
3）按home键，LED闪光灯进入搜索状态，然后click'connect设备“
4）如果你不提前打开控制器，您需要手动连接，单击“设备已被发现”，然后点击手柄驱动模型（NBRH-PEGA）
5）控制器连接
6）单击该连接的设备在下面显示的菜单，可以使设备管理上。
4. ..Controller操作：方向键控制A和B区，“B”键确认，出境“A”键，“左/右”键来控制C区切换，按“L”和“ R'按钮1-2秒，弹出退出界面
5.控制器充电：5V电源进行充电控制器访问（如PC或移动设备的电源适配器），在充电时，指示灯变为红色lihgt纯红色，充满电后，它会变成蓝色光;
注意
1，请不要丢弃内置电池与生活垃圾。
2当控制器工作不正常（如G.控制器不能关机或死机等），您可以使用回形针摸背控制器复位开关复位的左下角。
3，不要将本产品在潮湿或高温的地方存放。
4不要敲，打，穿刺，或尝试拆卸本产品，可能会造成产品造成不必要的损害。
5，充电时不要把靠近火源或其他热源塔控制器。
介绍
本产品是无线蓝牙控制研究，这是专为Android系统，与Nibiru的软件，无需安装任何额外的驱动程序和设置，连接可直接使用。
（1）内置锂电池，可以长期使用，安全性和稳定性;
（2）随着伸缩支架，可以把支架中的手机，方便游戏中使用（5.5英寸手机最大支持）;
（3）支持蓝牙3.0无线传输功能，您可以使用蓝牙控制器在6-8米之间的距离;
（4）人性化的软件设计，可以进入省电不连接状态模式;
（5）支持到Android 2.3以上系统;
使用手册
1.下载软件：下载Nibiru的APK文件
2.软件登记：运行Nibiru的客户端，有三种方法来注册，激活建议使用二维码注册，报名时必须联网，先注册，永久的影响（二维码注册了三个设备）;
3.连接
1）点击图标句柄Nibiru的软件
2）在设备管理界面中，单击添加新
3）按home键，LED闪光灯进入搜索状态，然后click'connect设备“
4）如果你不提前打开控制器，您需要手动连接，单击“设备已被发现”，然后点击手柄驱动模型（NBRH-PEGA）
5）控制器连接
6）单击该连接的设备在下面显示的菜单，可以使设备管理上。
4. ..Controller操作：方向键控制A和B区，“B”键确认，出境“A”键，“左/右”键来控制C区切换，按“L”和“ R'按钮1-2秒，弹出退出界面
5.控制器充电：5V电源进行充电控制器访问（如PC或移动设备的电源适配器），在充电时，指示灯变为红色lihgt纯红色，充满电后，它会变成蓝色光;
注意
1，请不要丢弃内置电池与生活垃圾。
2当控制器工作不正常（如G.控制器不能关机或死机等），您可以使用回形针摸背控制器复位开关复位的左下角。
3，不要将本产品在潮湿或高温的地方存放。
4不要敲，打，穿刺，或尝试拆卸本产品，可能会造成产品造成不必要的损害。
5，充电时不要把靠近火源或其他热源塔控制器。
Basic Info.
Model NO.: for android phone
Application: Android Mobile Phone
Type: Keyboard
Color: Black and White
Compatible Models: All Android Phone Above 2.3 System
Export Markets: North America, South America, Eastern Europe, Western Europe
Additional Info.
Packing: Each One in a Retail Blister Package
Standard: brand new quality
Origin: Guangzhou, China
Production Capacity: 10000PCS Per Month
Product Description
Wireless bluetooth game controller for android phone
Introduction
This product is a wireless bluetooth controll, which is designed for the Android system, with Nibiru software, without having to install any additional drivers and settings, the connection can be used directly.
(1) A built-in lithium battery, it can be long-term use, security and stability;
(2) With telescopic stand, you can put the phone in the stand (maximum support for 5.5-inch mobile phone) , easy for game uses;
(3) Bluetooth 3.0 wireless transmission function, you can use the bluetooth controller in the distance between 6-8 meters;
(4) User-friendly software design, you can enter the power saving mode without connection status;
(5) Support to Android 2.3 above systems;
User Manual
1. Download the software: and download Nibiru APK file
2. Software Registration: Running Nibiru client-side, there are three ways to register, activate recommend using two-dimensional code registration, registration must be networked, register first, permanent effect (a two-dimensional code register up three devices) ;
3. Connection
1) click on the icon handle nibiru software
2) in device manager interface, click the add new
3) press the home button, the LED flash get into the search state, then click'connect device'
4) if you do not open the controller in advance, you need to connect manually, click the 'device has been discovered' and then click on the handle drive model (NBRH-PEGA)
5) controller connection is
6) click on the connected device in the menu shown in below, you can make device management.
4. ..Controller operation: Arrow keys to control the A and B zones, 'B' button for confirm, 'A' button for exit, 'L / R' buttons for controlling the C zone switch, pressing 'L' and 'R' button for 1-2 seconds for eject exit interface
5. Controller Charging: 5V power supply for charging controller access (such as a PC or mobile device power adapter) , during charging, the LED turn to red lihgt solid red, after fully charged, it will turn to blue light;
Attention
1 Please do not be discarded the built-in battery with garbage.
2 When the controller is not operating properly (e. G. Controller can not be shut down or crash, etc. ) , you can use a paper clip to touch the bottom left corner of the back controller reset switch reset.
3 Do not put the product in a humid or hot place for storage.
4 Do not knock, beat, puncture, or attempt to disassemble the product as this may cause unnecessary damage to the product.
5 Do not put tha controller near fire or other heat sources when charging.
Introduction
This product is a wireless bluetooth controll, which is designed for the Android system, with Nibiru software, without having to install any additional drivers and settings, the connection can be used directly.
(1) A built-in lithium battery, it can be long-term use, security and stability;
(2) With telescopic stand, you can put the phone in the stand (maximum support for 5.5-inch mobile phone) , easy for game uses;
(3) Bluetooth 3.0 wireless transmission function, you can use the bluetooth controller in the distance between 6-8 meters;
(4) User-friendly software design, you can enter the power saving mode without connection status;
(5) Support to Android 2.3 above systems;
User Manual
1. Download the software: and download Nibiru APK file
2. Software Registration: Running Nibiru client-side, there are three ways to register, activate recommend using two-dimensional code registration, registration must be networked, register first, permanent effect (a two-dimensional code register up three devices) ;
3. Connection
1) click on the icon handle nibiru software
2) in device manager interface, click the add new
3) press the home button, the LED flash get into the search state, then click'connect device'
4) if you do not open the controller in advance, you need to connect manually, click the 'device has been discovered' and then click on the handle drive model (NBRH-PEGA)
5) controller connection is
6) click on the connected device in the menu shown in below, you can make device management.
4. ..Controller operation: Arrow keys to control the A and B zones, 'B' button for confirm, 'A' button for exit, 'L / R' buttons for controlling the C zone switch, pressing 'L' and 'R' button for 1-2 seconds for eject exit interface
5. Controller Charging: 5V power supply for charging controller access (such as a PC or mobile device power adapter) , during charging, the LED turn to red lihgt solid red, after fully charged, it will turn to blue light;
Attention
1 Please do not be discarded the built-in battery with garbage.
2 When the controller is not operating properly (e. G. Controller can not be shut down or crash, etc. ) , you can use a paper clip to touch the bottom left corner of the back controller reset switch reset.
3 Do not put the product in a humid or hot place for storage.
4 Do not knock, beat, puncture, or attempt to disassemble the product as this may cause unnecessary damage to the product.
5 Do not put tha controller near fire or other heat sources when charging.
