Qi Wireless Charger Receiver Coil Tag Ultra Slim Wireless Charging Adapter for Samsung Galaxy S3 III i9300 S 3 2014 Newest
Qi Wireless Charger Receiver Coil Tag Ultra Slim Wireless Charging Adapter for Samsung Galaxy S3 III i9300 S 3 2014 Newest
Qi无线充电接收线圈标签超薄无线充电的三星Galaxy S3 III I9300小号适配器3 2014年最新
| Qi无线充电接收线圈标签超薄无线充电的三星Galaxy S3 III I9300小号适配器3 2014年最新 这Qi无线充电接收器是专门为三星Galaxy S3。 最有效的方法通过在S3的电池捎带它来增加无线充电功能，它可以与任琦功能的充电器。 产品特点： 它是专为三星Galaxy S3。 超薄设计，而不增加S3的额外重量紧凑，重量轻。 通过S3的电池捎带它添加无线充电功能，它可以与任琦功能的充电器。 使用方便。 接收器可以被附接到所述电池所有的时间，而且它也不会中断正常使用的S3的。 如何使用它 ： 第1步：打开三星Galaxy S3后盖; 步骤2：坚持接收机卡到移动电话的电池和两个凸出触摸点必须接触两个凹槽旁边的电池; 第3步：关闭后盖; 第4步：将手机上的Qi无线充电板（不含税）。 注：接收器（SKU：PA1395W）需要与Qi无线充电板（SKU：PA1391，PA1391EU或PA1393）工作。 技术参数： 颜色：白色 输入功率：WPC5W 输出：DC5V /650毫安（最大值） 充电电流：DC5V /500毫安（最大值） 充电时间：约5小时 反应温度：-10〜40度 工作升温范围：低于20度（度以下的环境温度） 工作环境湿度：80％以下 工作寿命：上述4000次充放电 尺寸：62 * 45 *1毫米/ 2.44 * 1.77 * 0.04in 重量：5克/0.17盎司 包装清单： 1 * Qi无线充电接收器S3 |
| Qi Wireless Charger Receiver Coil Tag Ultra Slim Wireless Charging Adapter for Samsung Galaxy S3 III i9300 S 3 2014 Newest This Qi Wireless Charging Receiver is specially designed for Samsung Galaxy S3. The most efficient way to add wireless charging feature by piggybacking it on the battery of the S3, it works well with any Qi-enabled charger. Features: It is specially designed for Samsung Galaxy S3. Ultrathin design, compact and light weight without increasing additional weight of the S3. Adding wireless charging feature by piggybacking it on the battery of S3, it works well with any Qi-enabled charger. Easy to use. The receiver can be attached to the the battery all the time, and it would not interrupt the normal use of the S3. How to use it : Step 1: Open the back cover of the Samsung Galaxy S3; Step 2: Stick the receiver card to the mobile phone's battery and the two protuberant touch points must touch the two recesses next to the battery; Step 3: Close the back cover; Step 4: Place the mobile phone onto the Qi wireless charging pad (not included) . Note: The receiver (sku: PA1395W) needs to work with the Qi wireless charging pad (sku: PA1391, PA1391EU or PA1393) . Specifications: Color: White Input power: WPC5W Output: DC5V/ 650mA (Max) Charging current: DC5V/ 500mA (Max) Charging time: about 5 hrs Reaction temperature: -10 ~ 40 degree Working heat up range: below 20 degree (ambient temperature below degree) Working ambient humidity: below 80% Working life: Charge & discharge above 4000 times Size: 62 * 45 * 1mm / 2.44 * 1.77 * 0.04in Weight: 5g / 0.17oz Package list: 1 * Qi Wireless Charging Receiver for S3 |
