Wireless camera | 2.4 inch LED wireless baby camera kit
无线摄像头| 2.4英寸LED无线婴儿相机套件
采用2.4GHz的法时频transmissionaccord符合FCC，CE标准
高分辨率2.4英寸液晶显示屏
有操作文本菜单显示功能
支持一主多和连接，即一个接收器可以连接4变送器
远距离传输：高达露地200-300M;
清除夜视功能，可实现24小时监控
半双工语音TransmissionVoice清晰，声音的音量（0〜10）是可调节的
LCD的液晶屏可调节亮度screenthe（0-10）可调
婴儿的声音Vox的报警functionthe量或婴儿室在其容积软件发生
婴儿监视器已定将报警监控（屏幕会自动关闭，然后用声音开启）
提醒家长要多加注意宝宝。
与电视输出功能，支持TV显示器;
具有实时监控功能，并显示实时信息;
宝贝相机温度检测功能，并在液晶显示器实时显示;
支持音乐播放，如播放音乐睡觉，帮助宝宝入睡。
随着配对码功能：通过监视器和摄像机的配对码按钮，使配对
5.话筒，拿起语音信号
6.光敏电阻 - 开启/自动关闭夜视红外灯，红外灯不会亮
当光线强;红外灯将在当它是朦胧的。
7. 6V电源输入
机身后盖
8.温度检测器9扬声器（喇叭）10.Battery盖11.Battery盒（4pieces AAA电池）
监控关键功能说明
显示器前面板
1：UP键2：向下键上下移动在功能菜单中调节听筒音量
看接口
3：电源键
4：6V电源输入
5：话筒，拿起语音信号
6：音量指示灯，4个等级的说明
7：电源指示灯：工作指示灯和对码指示灯
8：液晶屏
9：左键
10：回车键，短按进入或退出菜单，长按设置的实时时间
11：右键左右可以调节的功能菜单中的数值，切换频道在
看着接口，左降低了渠道和右增加了通道
12. AV输出，这是电视显示和无液晶显示器时插入电视输出（这将需要
约2-3秒切换为插入或拔出）
13.Talk重点，双向通话/音乐播放键，可以从摄像头前接收的声音
按下此button.Meanwhile，就可以按下此之后，从监视器中收到的声音
按钮（液晶显示屏T），和显示器有声音，实现双向通话功能（液晶屏
无时间显示）时，按通话键again.Also，长按通话键来控制播放或
停止音乐。
14对：在ON位置电源键，电源指示是在很长一段时间，这意味着
它是在工作。如果状态按下此按钮3秒钟，直至电源指示灯闪烁，
这意味着它是对代码的状态，同时，你只需要按下发射器的电源键
直到其闪烁一次，它证明了对代码是成功的，它可以失去电源键后工作。
Adopt 2.4GHz Frenquency transmissionaccord with FCC,CE Standard
With high resolution 2.4' LCD display screen
Have operation text menu display function
Support one main and much attach,namely one receiver can connect 4 transmitters
Long-distance transmission:Up to 200-300m in open field;
Clear night vision function can realize 24 hours monitoring
Half-duplex Voice TransmissionVoice clear, volume of sound (0~10) is adjustable
Adjustable LCD screenthe brightness of LCD (0-10) is adjustable
Vox Alarm functionthe volume of baby sound or happened in baby room over the volume which software of
baby monitor has been fixed will alarm to monitor (screen automatically turn off,and then turn on with sound),
to remind parents to pay more attention to baby.
Monitor with TV Out function,support TV display;
Monitor with real time function,and display real time information;
Baby camera with temperature detection function and real-time display in the LCD Monitor;
Support music player,eg, play sleeping music to help baby go to sleep.
With pairing code function: make pairing through the pairing code buttons of monitor and camera
5. Microphone, pick up voice signal
6. Photoconductive resistance- Turn on /turn off night vision IR lights automatically, The IR lights will not on
when the light is strong;the IR lights will on when it is dim.
7. 6V Power input
Camera Back
8. Temperature detector 9. Speaker(loudspeaker) 10.Battery Cover 11.Battery Box( 4pieces AAA battery)
Monitor Key Function Illustration
Monitor Front
1:UP Key 2: Down Key Move Up and Down in the functional menu, adjust receiver volume
in watching interface
3: Power Key
4:6V Power input
5:Microphone, pick up voice signal
6:Sound Volume Indicator,4 grades instructions
7:Power LED: Work indicator and pair code indicator
8:LCD Screen
9:Left Key
10:Enter Key, Short press to enter or exit menu, long press to set up real-time time
11:Right Key Left and right can adjust the numerical in functional menu,switch channels in
watching interface,Left reduces the Channels and Right increases the Channels
12. AV Output,It is TV Display and without LCD Display when insert TV output(It will take
about 2-3 seconds to switch over for insert or pull out)
13.Talk Key, Two-way talk/Play music Key It can receive the voice from the camera before
pressing this button.Meanwhile,it can receive the voice from the Monitor after pressing this
button(LCD display T),and the Monitor has voice to realize two-way talk function(LCD Screen
without T display) when press Talk key again.Also,long press Talk key to control the play or
stop music.
14 Pair: When Power key in ON position,the power indication is on for a long time,and it means
that it is in the state of work.If you press this button for 3 seconds until the power indicator flash,
it means it is pair code state,meanwhile,you only need to press the power key of the transmitter
until it flashes once,it proves the pair code is successful,and it can work after loosing power key.
