3.5inch TFT LCD wrist Monitor CCTV Camera Test
3.5英寸TFT液晶显示器手腕CCTV摄像机测试
| 安全性测试仪是一种类型的产品，总结意见一线安全工程师，它是专为技术人员到前置摄像头方便的调试。 它有一些功能，如现场访问摄像机的图像，并提供相机暂时12V电源。 它拥有独特的外观和穿着的设计和处理弹性漆的表面变得更加人性化。 该产品内置的18650锂电池，提供强大，可靠的电力供应设备，同时，它会自动关闭，没有视频信号进行3分钟的功能。 所有的主控制器采用超低功耗解码芯片和MCU，提供8个小时的超长工作时间。 AT-1000安全测试是保障工程调试和维修技术人员的实用工具。 产品特点： ）））的3.5英寸的TFT显示屏 ）））PAL / NTSC制式自动识别 ）））12V / 500MA应急输出 ）））音频和视频输入 ）））USB通用充电接口 ）））3分钟内不视频自动休眠，访问视频于─唤醒功能 如何使用： AT-1000的安全测试仪的主要功能是显示前摄像机图像，方便了调试摄像机焦距，焦点和角度位置。 首先，请配合腕带在手腕上或固定支架。 上电：打开电源开关至ON位置，电源指示灯会亮起。 万一非视频的，这将是黑色或彩色屏幕（它根据解码芯片的不同而变化）。 访问视频后，图像可以正常显示。 关机：打开电源开关，直接OFF位置。 访问音频和视频：插入3.5mm插头的音频和视频线直接插入音频接口，连接另一端的摄像头。 如果上电，就可以直接观察到的视频图像。 音频是内置的放大器，因此它可以直接连接到MONI TOR或其他音频供应商，然后你就可以听到扬声器的声音。 参数 项目 规范 屏幕 TFT 3.5英寸，分辨率960 * 240 外壳材料 工程ABS塑料 表面处理 聚酯填料（弹性漆） 电池 18650锂电池DC3.7V（1600毫安设置到机TEST） 整机功耗 0.8W（12V应急电源没有打开） 充电器 5V / 1000MA 视频输入标准 PAL / NTSC 视频输入 1.0VP-P 应急电源输出 12V / 0.5A 音频输入 0.7 Vp-p的 自动休眠 3分钟 工作温度 5 ~ +50 尺寸 92MM * 75MM * 27MM（绿荫覆盖的部分为40mm） 重量 450g 打包清单： 1 *主机机 1 *充电器 1 *腕带 1 * 12V转接线 1 * A / V电缆 1 * BNC |
| Security Tester is a type of product that summarizes views of first-line safety engineers and it is developed specially for technical personnel to debug the front camera conveniently. It has some functions, like on-site access to camera images and providing temporary 12V power supply for the camera. It owns distinctive look and wearing design and the treatment for flexible paint on the surface becomes more humane. The product is built in 18650 lithium battery, providing powerful and reliable power supply for the device, along with the function that it will shut down automatically without video signal for 3 minutes. All the master controls use ultra-low-power decoder chips and MCU, providing eight hours of long working time. AT-1000 Security Test is a practical tool for security project commissioning and maintenance technicians. Features: ) ) ) 3.5-inch TFT display screen ) ) ) PAL / NTSC standard Automatic Identification ) ) ) 12V/ 500MA Emergency output ) ) ) Audio and video input ) ) ) USB Universal Charging Interface ) ) ) 3 minutes non-video automatic sleep, access-video-to- wake-up feature How to use: The main function of AT-1000 Security Tester is to show the front camera image, being convenient for debugging the cameras focal length, focus and angle position. At first, please tie the wrist strap to the wrist or fixed bracket. Power-on: turn the power switch to the ON position and the power indicator lights up. In case of non-video, it will be black or colorful screen (it varies according to the difference of the decoder chip) . After accessing to video, images can be displayed properly. Power-off: turn the power switch to the OFF position directly. Access to audio and video: insert 3.5MM plug of audio and video lines directly into audio interfaces, connecting the other end to the camera. In case of power-on, you can observe video image directly. The audio is built in amplifier, so it can be directly connected to the moni tor or other audio suppliers, and then you can hear the sound from the speakers. Parameters Items Specification Screen TFT 3.5 inch, Resolution 960 * 240 Shell materials Engineering ABS plastic Surface treatment Polyester wadding (elastic paint) Battery 18650 lithium battery DC3.7V (1600mA is set into the mechine) Machine power consumption 0.8W (12V emergency power does not open) Charger 5V / 1000MA Video input standard PAL / NTSC Video input 1.0Vp-p Emergency power output 12V/ 0.5A Audio Input 0.7 Vp-p Automatic sleep 3 minutes Operating Temperature 5 ~ +50 Size 92MM * 75MM * 27MM (shade cover part is 40MM) Weight 450g packing list: 1*Host machine 1*Charger 1*Wristband 1*12V switch wiring 1*A/ V cable 1*BNC |
