1对1通道单模光纤收发器10M / 100M / 1000M网络，电信级

1个RJ-45以太网端口，1SC接口，FC / LC可选

电源适配器不包括在内，因为插头类型是各国不同。 如果您需要的电源适配器，请与我们联系。

技术参数：

1个RJ45电口和一个SC光纤接口，双绞线和光纤的千兆以太网光信号转换

符合IEEE802.3z支持/ AB的1000Base-T和1000Base-SX / LX标准
1000M全双工模式光纤端口; 10/100 / 1000M自适应模式电口
电口能自适应直通线/交叉线连接
电口，支持全双工/半双工模式
最大支持9K字节包
支持IEEE802.3X全双工流控，半双工背压流控
支持链接失败通过纤维断裂检测功能（可选）
UTP最长100米远， 最长10至100公里单模光纤

特征

优质的光电一体化模块提供良好的光特性和电气特性，保证数据传输可靠，工作寿命长

主板采用了多层电路板结构，稳定，流畅的数据传输，强抗干扰能力和动力，以优化整体线条，使

消费更低，性能更稳定
提供远程链路丢失诊断，电口和光口链路链路连接诊断，动态数据传输，全双工/半双工，速度

指示符
提供了单一的RJ-45电口NIC / HUB，以及自动交叉识别，集线器或交换机连接到一个计算机网络卡

可与思科，北电，3COM等设备很好地兼容

卡片式或独立结构，集中管理2U机架式

平均failures5More一万小时的时间，与标准的电信运营商线路

1 pair 1 Channel Single-mode single fiber media converter 10M / 100M / 1000M Network, Telecom Grade

1 RJ-45 Ethernet ports, 1SC interface, FC / LC optional

Power adapter is not included, since the plug type is different for countries. If you need the power adapter, please consult us.

Technical Parameters

One RJ45 electrical port and one SC optical port , Gigabit Ethernet optical signal conversion between twisted pair and fiber optic

Comply IEEE802.3z / AB 1000Base-T and 1000Base-SX / LX standard
1000M optical ports for full-duplex mode ; electrical port for 10/100 / 1000M adaptive mode
Electrical port can adaptively direct line / crossover cable connection
Electrical ports support full / half duplex mode
Supports a maximum 9K bytes of long packets
IEEE802.3X support full-duplex flow control , half-duplex backpressure flow control
Support Link Fail Pass fiber breakage detection function (optional )
UTP longest 100 meters ; longest 10 to 100 km single-mode fiber

Features

quality optoelectronic integrated modules provide good optical properties and electrical properties to ensure reliable data transmission, long working life

motherboard uses a multilayer circuit board structure , stable , smooth data transmission , strong anti-interference ability and power to optimize the overall line to make

Consumption lower, more stable performance
provide remote link loss diagnostics, electrical interface and optical interface link link connection diagnostics, dynamic data transmission , full / half duplex , speed

Indicator
provides a single RJ-45 electrical port NIC / HUB, and automatic cross- identification , hub or switch connected to a computer network cards

can be well compatible with Cisco , Nortel , 3COM and other devices

Card type or independent structure for centralized management 2U rack

Mean time between failures5More than ten thousand hours , in line with standard telecom operators