Bluetooth Earphones with Mic Handsfree Headset HIFI Stereo Headband Headphone Multi-point for IOS Android smartphone Tablet PC
Bluetooth Earphones with Mic Handsfree Headset HIFI Stereo Headband Headphone Multi-point for IOS Android smartphone Tablet PC
蓝牙耳机与麦克风免提耳机HIFI立体声耳机头带式多点IOS Android智能手机平板电脑
项目细节
- 样式：
- 头带
- 连接器：
- 3.5毫米
- 包：
- 是
- 使用：
- 移动电话
- 功能：
- 蓝牙，消噪，麦克风
- 通讯：
- 无线
- 型号：
- BH-06A
- 蓝牙版本：
- 3.0 + EDR
- 按钮：
- 播放/暂停，最后，下一步，音量增大，音量减小
- 谈话时间： ：
- 11个小时
- 工作时间：
- 10小时
- 喇叭单元：
- 40毫米
- 扬声器频率范围：
- 20〜20KHz的
- 电池：
- 300MAH锂聚合物电池
- 谈话时间：
- 11个小时
- 工作时间：
- 10小时
- 充电时间：
- 2-3Hours
规范：
数量/箱：20PCS
| 型号 | BH-06A（G01） | 版本。 | 蓝牙v3.0 + EDR |
| 蓝牙配置文件 | HSP HFP A2DP AVRCP | 有效范围 | 10米 |
| 音乐时间 | 10个小时 | 谈话时间 | 11个小时 |
| 待机时间 | 达250小时 | Iuput | DC：5V / 180MAH |
| 充电时间 | （2HOUR | 尺寸 | 19 * 20 *7.5厘米 |
关于BH-06（G01）
BH-06是一款立体声耳机与蓝牙技术，它支持以下蓝牙模式：
HSP ----耳机模式
HFP ----免提模式
A2DP ----高级音频传输模式
AVRCP ----音频/视频远程控制配置文件
概述：
电池充电用USB线
。 步骤1：将USB充电线插入USB端口FO PC
。 第二步：将充电线与耳机的chaeging港
。 当红灯亮时，耳机充电
。 当蓝色指示灯亮起，耳机完全充电
。 这需要约3小时到耳机完全充电
警告
。 电池是可充电的。
。 第一次充电：在使用这款蓝牙耳机，请充分耳机的电池充电
如何使用
开启/关闭耳机开关
| 功能 | 操作 | LED指示灯 | 提示音 |
| 打开 | 按住MFB 3秒 | 蓝色指示灯亮1秒 | “不要做Do'tone |
| 关掉 | 按住MFB 6秒 | 红色LED指示灯亮1秒 | “不要做Do'tone |
乙配对蓝牙设备的耳机
a）如何进入配对模式
要确保G01在关机状态首先，按住MFB 6秒钟，直到红色和蓝色led指示灯交替闪烁，或者你听到的指示“做这样”两次问世。 然后松开MFB，本机将成为模式。
B）配对的蓝牙手机耳机。
请确保您的手机有蓝牙功能，可以使用。
具体的配对方法并不相同与不同的手机，请编队参阅您的手机使用手册进行进一步。 步骤如下：
一）配对时，请保持耳机与手机在1米的范围内。
b）起动手机的蓝牙功能，搜索蓝牙设备
c）使耳机进入配对模式（请参见“如何进入配对模式”）
搜查后，蓝牙设备列表中选择“G01”。
a）根据提示，输入密码或PIN NO：0000“，然后按的键”是“或”确定“
B）配对成功后，蓝牙设备列表中选择G01，并按“连接”
C）后成功连接，耳机的蓝色LED快速闪烁两次，时间或有每4秒。
戴上耳机
这款耳机的字符串是可伸缩的。 请根据实际使用的调整。 耳机的标志“R”代表右耳。 根据LOGO的指示请戴上耳机
制作用耳机接听电话
| 功能 | 耳机的状态 | 操作 |
| 语音拨号 | 待机模式 | 按住MFB 2秒，释放它，直到听到提示音 |
| 重拨最后一个号码 | 待机模式 | 短按MFB两次快速 |
| 提高音量 | 会话模式 | 短按或长按V +，当音量调整到最大，你将听到提示音 |
| 音量减小 | 会话模式 | 短按或长按V-，当音量调整到最大，你将听到提示音 |
| 答呼叫 | 铃声 | 短按MFB |
| 拒绝呼叫 | 铃声 | 按住MFB 1秒，然后松开，直到听到提示音 |
警告：来自耳机的过大的压力会导致听力受损
笔记：
。 对于一些移动电话，当按下接受电话上的键，通话将被发送到移动电话。 在这个时候，你可以切换通话通过对话切换按钮或通过手机上操作使用耳机。 请参考您的手机的详细信息，请指示。
玩音乐：
当耳机与手机或蓝牙发射器，支持A2DP连接，就可以通过耳机欣赏音乐无线
| 功能 | 耳机的状态 | 操作 |
| 玩 | 玩音乐 | 短按MFB |
| 暂停 | 暂停 | 短按MFB |
| 最后一首歌 | 播放最后的音乐 | 短按（键 |
| 下一首歌曲 | 播放下一首音乐 | 短按）键 |
| 提高音量 | 播放音乐音量 | 短或长按+键，当音量调整到最大，你将听到提示音 |
| 音量减小 | 播放音乐音量降低 | 短或长按VOL键，当音量调整到最大，你将听到提示音 |
笔记：
远程控制最后一曲/下一曲/暂停功能，它需要你的手机或蓝牙传输器支持AVRCP。 请参阅您的手机或蓝牙发射器的详细信息，请指示。
LED指示灯
一）收费
| LED指示灯 | 耳机的状态 |
| 红色LED亮 | 充电 |
| 蓝色LED指示灯亮起 | 完成充电 |
b）在使用
| LED指示灯 | 耳机的状态 |
| 红色和蓝色的LED指示灯交替闪烁 | 配对模式 |
| 蓝色LED快速闪烁每2秒一次 | 未连接到设备 |
| 蓝色LED逐渐开启和关闭 | 会话模式 |
| 红色LED灯闪烁每20秒两次 | 低电量 |
| 蓝色和红色闪烁每2秒 | 待机模式 |
重新连接到蓝牙设备
a）自动连接
每个耳机开机时，它会连接到最近，最后连接的设备自动，当然你也可以拒绝连接BH-06（G01）
B）手动连接到上次连接的设备
当耳机处于待机模式，doesn't连接到任何设备，短按多功能键一次，它会自动连接到上次连接的设备
包装详细信息
- 单位类型：
- 片
- 包装重量：
- 0.450千克（0.99磅。）
- 包装尺寸：
- 21厘米x19厘米x 8厘米（8.27in x 7.48in x 3.15in）
Item specifics
- Style:
- Headband
- Connectors:
- 3.5mm
- Package:
- Yes
- Use:
- Mobile Phone
- Function:
- Bluetooth, Noise Cancelling, Microphone
- Communication:
- Wireless
- Model Number:
- BH-06A
- Bluetooth Version:
- 3.0+EDR
- Button:
- Play/ Pause, Last, Next, Volume up, Volume down
- Talk Time: :
- 11 Hours
- Operating Time: :
- 10 hours
- Horn UNIT:
- 40mm
- Speaker Frequency Range:
- 20~20KHz
- battery:
- 300mAh Li-polymer battery
- Talk Time:
- 11 Hours
- Operating Time:
- 10 hours
- Charge time:
- 2-3Hours
SPECIFICATION:
QTY/ Carton: 20PCS
| Model no | BH-06A (G01) | Ver. | Bluetooth v3.0+EDR |
| Bluetooth Profile | HSP HFP A2DP AVRCP | Effective Range | 10 Meters |
| Music Time | 10 Hours | Talk Time | 11 Hours |
| Standby Time | Up to 250 Hours | Iuput | DC: 5V/ 180mAh |
| Charge Time | (2Hour | Dimensions | 19*20*7.5cm |
About BH-06 (G01)
BH-06 is a stereo headset with Bluetooth technology, It supports the following Bluetooth profiles:
HSP----Headset Profile
HFP----Hands-free Profile
A2DP----Advanced Audio Distribution profile
AVRCP----Audio/ Video Remote Control Profile
Overview:
Charging the battery with USB cable
. Step1: Insert USB charging cable into USB port fo PC
. Step2: Connect charging cable with the chaeging port of headset
. When the red light is on, the headset is charging
. When the blue light is on, the headset is charged fully
. It takes about 3 hours to charge the headset fully
Warning
. The battery is rechargeable.
. First time charging : Before you use this Bluetooth headset, please charge the battery of headset fully
How to use
A Switching on/ off headset
| Function | Operation | LED indicator | Indication tone |
| Switch on | Press and hold the MFB for 3 seconds | Blue LED is on for 1 second | 'Do Do Do'tone |
| Switch off | Press and hold the MFB for 6 seconds | Red LED is on for 1 second | 'Do Do Do'tone |
B Pairing the headset with Bluetooth devices
A) How to enter pairing mode
Be sure G01 in power off status first, Press and hold the MFB for 6 seconds, till Red and blue led blink alternately, or you hear the indication 'Do Do' twice come out. And then release the MFB , the unit will become mode.
B) Pairing the headset with Bluetooth mobile phone.
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures were not the same with different mobile phone, Please refer to your mobile phone manual for further in formation . Steps as follows:
a) Please keep the headset and mobile phone in the range of 1 meter when pairing.
b) Start the Bluetooth function of mobile phone and search the Bluetooth devices
c) Make the headset enter into pairing mode (please refer to 'how to enter into pairing mode')
After searched, select ' G01' in the Bluetooth device list.
a) According to indication, enter password or PIN NO : 0000', and press the key of 'Yes' or 'confirmed'
b) After successful pairing, select G01 in the Bluetooth device list, and press 'connect'
c) After successful connecting, the blue LED of the headset quickly blinks twice or there times every 4 seconds.
Wearing the headset
The string of this headset is retractable . please adjust according to the actual use. Logo 'R' of headset represents right ear. Please wear the headset according to the indication of the LOGO
Making calls with the headset
| Function | Status of headset | Operation |
| Voice dial | Standby mode | Press and hold MFB for 2s, release it till hearing indication sound |
| Redial last number | Standby mode | Short press MFB twice quickly |
| Volume up | Conversation mode | Short press or long press V+ , when the volume is adjusted to max , you will hear an indication tone |
| Volume down | Conversation mode | Short press or long press V-, when the volume is adjusted to max , you will hear an indication tone |
| Answer calling | Ringing | Short press MFB |
| Reject calling | Ringing | Press and hold MFB for 1s, and release it till hearing indication sound |
Warning: Excessive pressure from headphones can cause hearing loss
Notes:
. For some mobile phone , when you press the key of accepting on the phone , the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone . please refer to the instruction of your mobile phone for further information.
Playing music:
When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly
| Function | Status of headset | Operation |
| play | Playing music | Short press MFB |
| Pause | Pausing | Short press MFB |
| Last song | Playing last music | Short press ( key |
| Next song | Playing next music | Short press) key |
| Volume up | Playing music volume up | Short or long press + key , When the volume is adjusted to max , you will hear an indication tone |
| Volume down | Playing music volume down | Short or long press- key, when the volume is adjusted to max, you will hear an indication tone |
Notes:
Remote control the function of last song/ next song/ pause, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter for further information.
LED indicator
a) charging
| LED indicator | Status of the headset |
| Red LED is on | Charging |
| Blue LED is on | Finish charging |
b) In use
| LED Indicator | Status of the headset |
| Red and blue LEDs blink alternately | Pairing mode |
| Blue LED quickly blinks once every 2 seconds | Not connected to a device |
| Blue LED gradually turns on and off | Conversation mode |
| Red LED blinks twice every 20 seconds | Low power |
| Blue and red blinks every 2 seconds | Standby mode |
Re-connecting to a Bluetooth device
a) Automatic connecting
Every time the headset is switched on, it will connect to the nearest, and the last connected device automatically, of course you can reject to connect BH-06 (G01)
b) Manual connecting to last connected device
When the headset is in standby mode and doesn´t connect to any devices, short press MFB button once, it will connect to last connected device automatically
Packaging Details
- Unit Type:
- piece
- Package Weight:
- 0.450kg (0.99lb.)
- Package Size:
- 21cm x 19cm x 8cm (8.27in x 7.48in x 3.15in)
