Simple GSM alarm ssytem with Powerfull APP feature

Simple GSM alarm ssytem with Powerfull APP feature

简单的GSM报警器ssytem与强大的APP功能

62.01 USD

加入意向
1. GSM网络的支持,APP在iOS和Android应用程序中同时工作

2.设置通过APP和以下内容:

3. 5报警电话/短信号+1报警CID电话号+1上传短信号码+ 10S录音+ ARM +延时报警延迟+报警声设置+通话时间设定+无线+编程防区属性设置用户密码+程序密码 +复位+报警历史+现状历史+温度设定。

4.使用APP检查报警主机的状态,以及查看当前温度的房子。

5.一个继电器输出控制(NO / NC可选).Temperature控制输出,报警输出,APP控制输出可选。

6.无线编码功能,支持16个无线防区+ 4个有线防区,每个防区可单独设置报警延时。

7.用户可以通过应用程序或手机短信修改的区域名称。 区域名称可由用户定义。

8.报警短信内容可以由用户进行修改。

9.支持联系ID协议。 (上传到CMS信息,包括报警信息和布防/撤防信息)。

10.布防模式:在家设防模式和离开ARM模式。

11.布防或撤防方式:用户可以使用遥控器,应用程序,远程调用,无线键盘布防或撤防系统

12.温度传感器报警功能,用户可以设置一个固定的温度范围内,一旦实际温度比该范围更高或更低,短信将被发送。

13.支持IP摄像头,一个报警输出可互动的IP摄像机。

14.支持工厂重置功能。
1. GSM network support, work with APP application both on IOS and Android

2. Setting by APP and following:

3. 5 alarm call/ SMS No. +1 alarm CID call No. +1 upload SMS No. + 10S recording + Arm Delay + Alarm Delay + Alarm Beep Setting+ Call-in time setting+ Wireless Program+ Zone Attribute Setting+ User password + Program Password + Reset + Alarm History + Status History+temperature setting.

4. Use APP to check the Alarm host status as well as check the present temperature in house.

5. One relay output control (NO/ NC for optional) .Temperature control output, alarm output, APP control output for optional.

6. Wireless encode feature, support 16 wireless zones+ 4 wired zones, every defence zone can be set alarm delay separately.

7. User can modify the zone name via APP or SMS. zone name can be define by user.

8. Alarm SMS content can be revised by user .

9. Support Contact ID protocol. (Upload to CMS information including Alarm information and Arm/ disarm information) .

10. Arm Mode: Home arm mode and Away arm mode.

11. Arm or Disarm method : User can use Remote controller, APP, remote call, wireless keypad to Arm or disarm the system

12. Temperature sensor alarming feature, user can set a fixed temperature range , once the actual temperature is higher or lower than this range, SMS will be sent.

13. Support IP camera , one alarm output can interactive IP camera.

14. Support Factory resetting feature.