LED lamp | Wireless RF Touch Panel LED RGB Dimmer Remote Controller For RGB LED Strip, 30M Effective Remote Distance
LED lamp | Wireless RF Touch Panel LED RGB Dimmer Remote Controller For RGB LED Strip, 30M Effective Remote Distance
LED灯| 无线射频触摸屏LED RGB调光遥控器对于RGB LED灯条，30M有效的远程距离
对于RGB LED灯条DC 12-24V无线LED控制器射频触摸面板LED调光器RGB遥控器
技术参数： 工作温度-20〜60 degreeee输入电压12V〜24V输出3通道连接方式共阳静态功耗（0.5W输出电流6A（每个通道）输出功率12V（216W 24V（RF遥控器为433.92MHz的432W频率
每个按钮的派别如下 关键指令名称备注开/模式ON在任何时候，在20秒当静态的，关键是自动进入睡眠状态，那么它在总的觉醒关键22modes关关在任何时候彩铃触摸想要在任何模式下的任何颜色 ，触摸色环将进入环模式彩色/速度+颜色会发暗，速必达，当你触摸在任何状态下颜色较深的环形模式的关键，加快动态模式（8级）颜色/速度 - 该颜色会偏暗，速度会有所回落，当你触摸在任何状态下的主要颜色调光器的响铃模式，速度下降为动态模式（8级），亮度+当你触摸键在任何状态下亮度的亮度将会照亮 动态模式和静态模式，但环模式和颜色的光交叉淡入淡出（8grades）亮度 - 亮度会变暗，当你触摸键在任何状态
匹配： 为了配合遥控器接收器（不需要做这个时首先开箱）。 按“亮度 - ”键一次，当第一次接通3秒内。 此灯闪烁3次，表示遥控器匹配。
结算方式： 按“亮度+”键一次，当第一次接通3秒内，该指示灯将闪烁6次，如果结算成功。
四，温馨提示： 本产品1.电源电压为DC 12V-24V 根据连接如图2。引线应正确连接。 3.保证本产品为一年，发生的产品故障是由于人为因素不在免费保修。 4.在连接供电，确保无短路。 安装位置确保不潮湿，阳光直射和温度较高等。
套餐包括： 1个* LED控制器
     |
DC 12-24V Wireless LED Controller RF Touch Panel LED Dimmer RGB Remote Controller for RGB LED STRIP LIGHT
Technical parameters: Working temperature -20~60 degreeee Input voltage 12V~24V Output 3 channels Connecting mode Common anode Static power consumption ( 0.5W Output current 6A (each channel) Output power 12V: (216W 24V: (432W Frequency of RF remote controller 433.92MHz
The faction of each button as follows Name of key Instruction Remarks On/ Mode ON in any time, when static under 20seconds, the key will be automatically go to sleep, then it's as awakening key 22modes in total OFF Off in any time Color ring Touch any color you wish In any mode, touching the Color ring will be into ring mode Color/ Speed+ The color will be dark, Speed will be up, when you touch the key in any state Color darker for ring mode, speed up for dynamic modes (8 grades) Color/ Speed- The color will be dim, Speed will be down, when you touch the key in any state Color dimmer for ring mode, speed down for dynamic modes (8 grades) Brightness+ The brightness will be brighten when you touch the key in any state Brightness for dynamic modes and static modes, but ring mode and color light crossfade (8grades) Brightness- The brightness will be dim, when you touch the key in any state
Matching: To match the remote control to the receiver (you do not need to do this when first out the box) . Press 'brightness-' Key once when first switched on within 3 seconds. This light will blink 3 times to indicate that the remote control is matched.
Clearing mode: Press 'brightness+' Key once when first switched on within 3 seconds, the light will blink 6 times if clearing is successful.
IV Tips: 1. Supply voltage of this product is DC 12V-24V 2. Lead wire should be connected correctly according to connecting chart. 3. Warranty of this product is one year, the product failure occurred due to human factors is not in free warranty. 4. Before connecting the electricity, ensure no short circuit. The installation location ensure no damp, direct sunlight and higher temperature etc.
Package Include: 1pcs*LED controller
|
