Wholesale Signal Booster Splitter

Wholesale Signal Booster Splitter

批发信号放大器分配器

19.48 USD

加入意向

380〜2500MHz的双程SMA功率分配器信号增强器分配器


产品特点:


1)宽带频率2路分流器:380-2500MHz;

2)连接器类型:SMA阴(内孔);

3)良好的性能,低插入损耗和驻波比。

描述:

升功分器/除法器是一种所有输入信号的能量将被分成两个或多个信号的能量输出装置。

升功率分配器/分频器被用在各种各样的应用并能满足几乎任何要求,其中一个信号

需要分发或组合。

|我们紧凑,微带分路器/分配器/组合提供最小的插入损耗,同时提供具有卓越的相位输出端口之间的高隔离

和幅度平衡。

这里是我们的380-2500MHz 2路功分器/除法器的规格


规范:


该项目是全新的,未使用的,未损坏。 请参阅上市的全部细节。

产品描述:

全新双向功分器380-2500MHz 2路功分器。

为在信号分配系统中使用,以将放大的信号分割到4个天线,信号损失最小。

全天候情况下室内或室外使用。

该产品非常适合于室内应用需要RF的组合或分割,以适应多

天线位置。

这2路分流器允许您从单个放大器/中继器驱动两个内部天线。 因为你是分裂

信号的每个天线,这相当于大约70%的覆盖​​距离的信号将获得约1/2

相比,驱动单个天线。 让您(使用多个分离器最多4个)驱动两个室内天线

用单个放大器/中继器。

380~2500MHz 2-way SMA Power Divider Signal Booster Splitter


Features:


1) Broadband frequency 2 way splitter: 380-2500MHz;

2) Connector type: SMA female (hole inside) ;

3) Good performance, low insertion loss and VSWR.

Description:

l Power splitter/ divider is a kind of all input signal energy will be divided into two or more signals energy output devices.

l Power splitters/ dividers are used in a wide variety of applications and can satisfy almost any requirement where a signal

needs to be distributed or combined.

l Our compact, microstrip splitter/ divider/ combiners provide minimal insertion loss while delivering high isolation between output ports with exceptional phase

and amplitude balance.

Here is the specifications of our 380-2500MHz 2-way power splitter/ divider


Specification:


The item is brand-new, unused, undamaged. See the listing for full details.

Product Description:

Brand New Two-way Power Dividers 380-2500MHz 2-way Power Splitter.

For use in signal distribution systems to split the amplified signal to up to 4 antennas with minimal signal loss.

Weatherproof case for indoor or outdoor use.

The product is ideal for in-building applications that require the combining or dividing of RF to accommodate multiple

antenna locations.

This 2-way splitter allows you to drive two interior antennas from a single amplifier/ repeater. Because you are splitting the

signal each antenna will receive approximately 1/2 of the signal which equates to about 70% of the coverage distance

when compared to driving a single antenna. Allows you to drive two interior antennas (up to 4 using multiple splitters)

with a single amplifier/ repeater.