- 符合IEEE802.11b / g的型号兼容

信号 - 宽范围的输入-5〜15dBm时，自动增益控制支持（AGC）

- 双向半双工收发器开关（即插即用），自动，易于使用

采用同步开关控制技术，保证干线放大器同步收发器AP

- 高线性功率放大器，可以有效地抑制互调杂散

高接收灵敏度，确保了上行链路和下行链路的平衡

- 内置雷击保护，反向电压保护和浪涌保护，过载保护保证其常年工作

产品特点：

1在无线网络覆盖和稳定性大幅提高;

2支持2.4GB / B + / G / N超3G无线网络和蓝牙设备，国际公认工业频段的2400-2500MHz频率范围;

3最强输出功率2W（33dBm的，2000MW），双向，半双工和自动切换（即插即用），自动增益控制;

4个SMA接头，更换方便各种天线，它可以与在室内和室外取向连接，全向天线的;

5可以与蓝牙设备，无线网卡，无线路由器，无线接入点结合使用;

6输入电平没​​有限制，即使输入功率再次高不会燃烧;

7全铝合金建筑，便于散热;

8简单，安装方便，不需要软件，即插即用。

产品安装图

- compatible with IEEE802.11b/ g model

Signal - a wide range of input -5 ~ 15dBm, support for automatic gain control (AGC)

- two-way half duplex transceiver switch (Plug&Play) , automatic, easy to use

Adopt synchronous switch control technology, ensure the trunk amplifier with synchronous transceiver AP

- the high linear power amplifier, can effectively suppress the intermodulation and stray

High receiving sensitivity, ensure the uplink and downlink balance

- built in lightning protection, reverse voltage protection and overload of surge protection guarantee its perennial work

Product features:

1 a substantial increase in wireless network coverage and stability;

2 support 2.4G B/ B+/ G/ N super G wireless network and Bluetooth devices, the 2400-2500MHz frequency range of internationally recognized industrial band;

3 of the strongest power output of 2W (33dBm, 2000MW) , bi-directional, half duplex and automatic switching (plug and play) , automatic gain control;

4 SMA joint, convenient replacement of various antennas, which can be connected with the indoor and outdoor orientation, omnidirectional antenna;

5 can be used in conjunction with the Bluetooth device, wireless network card, wireless router, wireless AP;

The 6 input level is not restricted, even if the input power is again high will not burn;

7 all aluminum alloy building, convenient for heat dissipation;

8 simple and convenient to install, don't need software, plug and play.

Product installation diagram