无线摄像头探测器

这是来自中国的强大的无线探测器，支持时间dsiplay从900MHZ检查无线信号至2.7GHz使用此设备，您可以检查一次视频，当你在酒店房间或公共场所，漂亮的反间谍器材。

无线探测器的特点具有2.5寸显示屏来检查无线间谍相机的时间：

1.2.5“TFT高清晰液晶屏。 美铝外壳的金属色

2.1.25“LCM显示器显示电池电量，接收灵敏度指标，在扫描过程中/关和频率读数报警音

3.频率范围进行扫描：900兆赫〜2.7GHz的，涵盖了大部分的无线摄像头的频率在市场上。

4，重量轻，携带方便，由4节AA 1.5V电池或附带的5V电源工作。

5.电池，历时约3小时。

6.扫描仪可以在NTSC，PAL彩色或B / W自动切换的无线凸轮。

7.当视频信号被发现，运行频率读数在LCD显示屏上会停止显示确切的频率读数。

8.凸轮现场看到，观察者看到的是将在2.5英寸的液晶显示屏上立即显示。 然后，您可以指认现场，并找到隐藏的无线凸轮。 频率范围内9.多个摄像头都可以找到。

10.如果没有RF信号被发现，整个扫描过程大约需要20秒。 扫描占地面积500英尺范围内（152米）

11.扫描仪可以作为一个便携式接收器来监视你可能已经安装了任何无线凸轮。

设置在扫描仪的扩展应用12.视频输出和报警输出插孔。 内置扬声器。

怎么运行的？

当你怀疑有隐藏的凸轮在该地区，或者你想知道那是没有隐藏凸轮在该地区。 打开错误扫描仪，它会开始扫描500英尺（152米），从你的立场范围内的凸轮。 如果发现任何凸轮，凸轮当前指向现场将显示在2.5英寸的液晶显示屏上。 按下扫描仪上了智能键或向下一次锁定的场景。 然后，你可以轻松地找到隐藏的凸轮。 如果再次按下智能键，将继续在该地区，扫描其他凸轮（如有）。 注意：扫描仪不能检测到硬连线凸轮。

技术参数：

频率范围包括：900MHz的〜2700MHz

扫描：自动/手动

接收器灵敏度设置：L：-50dBm，ML：-55dBm，M：-60dBm，MH：-65dBm，H：70dBm，UH<-70dBm

视频制式：NTSC / PAL（EIA / CCIR）自动检测

天线：两个旋入式全向天线

天线长度：5.5厘米（2​​-1 / 8“），并8厘米（3-1 / 8”）

功耗：650毫安最大。

电源：100〜240VAC输出5V 1A

电池：4节AA 1.5V电池（3〜5小时）

外形尺寸：74（宽）x 120（L）×35（高）mm

重量：266克不包括。 电池

包装内容：

1个凸轮漏洞扫描与LCD显示器

2个旋入存根天线

1个通用的5V稳压电源

1个迷你插头转RCA AV线（视频/报警输出）

1个耳机无声监控

Wireless camera Detector

This is a powerful wireless detector from China, support in time dsiplay to check the wireless signal from 900MHZ to 2.7GHZ with this device you can check video in time when you in hotel, room or public place, nice anti-spy equipment.

Features of Wireless Detector With 2.5 Inch Display to Inspect Wireless Spy Camera in time:

1.2.5 ' TFT high resolution LCD screen. Beautiful aluminum casing in metallic color

2.1.25 ' LCM display showing battery level, receiver sensitivity indicator, alarm audio on/ off and frequency reading during scanning

3. Frequency range to be scanned: 900MHz~2.7GHz, covering frequency of most wireless cams in the market.

4. Light weight, portable, operated by 4 X AA 1.5V batteries or the included 5V power supply.

5. The batteries last for about 3 hours.

6. The scanner can find wireless cam in NTSC, PAL, color or B/ W. Auto switching.

7. When a video signal is found, the running frequency reading on the LCD display will stop showing the exact frequency reading.

8. The cam scene that the watcher is seeing will be shown on the 2.5' LCD monitor immediately. You may then identify the scene and locate the hidden wireless cam. 9. Multiple cams within the frequency range can be found.

10. The whole scanning process takes about 20 seconds if no RF signal is found. Scanning covers area up to 500 feet range (152 meters)

11. The scanner may be used as a portable receiver to monitor any wireless cam you may have installed.

12. Video Output and Alarm Output jacks are provided on the scanner for extended applications. Built-in speaker.

How it works?

When you suspect there is hidden cam in the area, or you want to make sure that is no hidden cam in the area. Turn on the bug scanner and it will start to scan for cam within the range of 500 feet (152 meters) from where you stand. If any cam is found, the scene that the cam is currently pointing at will be shown on the 2.5' LCD display. Push the Smart Button on the scanner up or down once to lock the scene. Then you can easily locate the hidden cam. If you press the Smart Button again, it will continue to scan for other cam in the area, if any. Note: the scanner cannot detect hard-wired cam.

Specifications:

Frequency range covered: 900MHz ~ 2700MHz

Scanning: auto/ manual

Receiver sensitivity settings: L: -50dBm, ML: -55dBm, M: -60dBm, MH: -65dBM, H: 70dBm, UH<-70dBm

Video system: NTSC/ PAL (EIA/ CCIR ) auto detect

Antenna: Two screw-in omni-directional antennas

Antenna length: 5.5cm (2-1/8') and 8cm (3-1/8')

Power consumption: 650mA max.

Power supply: 100~240VAC output 5V 1A

Battery: 4 x AA 1.5V batteries (3~5 hours)

Dimensions: 74 (W) x 120 (L) x 35 (H) mm

Weight: 266 gm excl. batteries

Package content:

1 x cam bug scanner with LCD displays

2 x screw-in stub antennas

1 x universal 5V regulated power supply

1 x mini plug to RCA AV cable (for video/ alarm outputs)

1 x earphone for silent monitoring