基本功能：

1.最简单的安装
2.拆下在线安装和设备管理
3. OBD II插座接口
4.内部GPS和GSM天线
5.双通信模式（GPRS和短信）
6.实时跟踪
7.低功耗
8.路由管理
9.电子围栏管理
10.超速警报
11.监控驾驶行为
12.本站甚至当车辆是关闭的情况下，你拖到
13.高灵敏GPS UBLOX模块
14.内置8M FALSH，GPRS高速缓存8000，短信256缓存

主要功能：
1.监控功能
监控功能可以帮助驾驶者了解车内的状况，并提供分析报告时，它已经被偷走了。
2. OTA远程更新功能
OTA（空中下载）使能端固件升级，以配合最新的软件。
3. GPS跟踪记录仪功能
当GPS大头针的位置时，终端将记录轿厢的运行轨迹预设时间。跟踪记录可以通过该软件可以读取
，使存储总共130,000记录。
4. GPS和GSM追踪
当GPS不能接收信号，GSM基站将使用的辅助定位，以确保任何时候可以在找到
车辆位置。
5. GPS盲点报告
当进入GPS信号的区域，不留信号区，在会上终端发送的报告中提醒平台。
6. GSM盲区存储/报警补货
GSM盲区无法正常发送数据，数据将被自动存储和GSM信号的自动完成恢复
发送到平台，以确保该轨迹不会丢失。内置FLASH 8M，GPRS高速缓存8000，短信256缓存。
7.里程报告
每个GPRS数据将包含汽车的里程，这可以通过修改最初使用的原车的终端默认值
里程表值。
8.智能睡眠模式
此命令启用睡眠模式功能。在这种模式下，记录时间和地点均无效。

Basic Functions:

1. Easiest Installation
2. Remove Online Setup & Device Management
3. OBD II Plug Interface
4. Internal GPS and GSM Antenna
5. Dual communication mode (GPRS & SMS)
6. Real-Time Tracking
7. Low power consumption
8. Route management
9. Geo-fence management
10. Over speed alerts
11. Monitor Driving Behavior
12. Powered On Even When Vehicle Is Off In Case You Are Towed
13. Highly Sensitive uBlox GPS Module
14. Built-in FALSH 8M, GPRS cache 8000, the SMS cache 256

Main Functions:
1. Monitor Function
Monitor function helps driver to know the status inside the car, and provide analysis report when it has been stolen.
2. OTA Remote Update Feature
OTA (Over the Air) enable terminal firmware upgrade to match the latest software.
3. GPS Tracking Recorder Function
When the GPS tacks the position, the terminal will record car running track preset time. Track record can be read by the software of the
, enable to store a total of 130,000 records.
4. GPS&GSM Tracking
When the GPS cannot receive signals, the GSM base station will use the secondary positioning, to ensure that any time can be found in the
vehicle location.
5. GPS Blind Spot Report
When entering the GPS signal area and leave no signal area, the terminal at the meeting sent the report to remind platform.
6. GSM Blind area storage/Replenish Alarm
GSM blind area can not be normal to send the data, the data will be automatically stored and auto-complete recovery of the GSM signal
transmitted to the platform, to ensure that the trajectory is not lost. Built-in FLASH 8M, GPRS cache 8000,the SMS cache 256.
7. Mileage Report
Each GPRS data which will contain the mileage of the car, which can modify the initial use the terminal default value of the original car
odometer value.
8. Smart Sleep Mode
This command enables the sleep mode function. In this mode, logging, timing and location are all disabled.