批发2.4G无线摄像头视频发射器和接收器为汽车后视摄像头XRD0091

| 2.4GHz的无线摄像机的视频发射器和接收器为汽车后视摄像头XRD0091 与该无线模块,它没有必要从前面的引线上向后车,所以 这将节省很多摄像机的安装工作,它会更容易让你安装摄像头。 100%全新,高品质 安装方便 花点时间让您的相机成为一个无线摄像头 2.4GHz的无线发射器/接收器组(12伏车辆安装) 工作范围:高达50米左右(糠心) 适合所有RCA复合视频连接 电源:DC 12V 发射器/接收器电缆长度:1.5米 如何使用无线模块安装摄像头: 拿出你股票的车牌光你的车的后面。 固定相机到股票车牌光了。 相机的内置牌照灯连接到那里的股票牌照灯相连接,以获得功率 通过两条电缆无线模块(发送器)连接到你的相机 - 黄色插头AV输出和黑色插头电源 无线模块(发送器)连接到反向光你的车获得的权力 - 红色线为正极,黑线为负 无线模块(接收器)连接到您的车载显示器 - 黄色插头AV输入。 无线模块(接收器)连接到您的汽车电池或点烟器来获得动力 - 红色线为正极,黑线为负 你会看到,当你的反向车的图像。 套餐包括: 1个2.4GHz的发射机 1个的2.4GHz接收器 |
| 2.4Ghz Wireless Camera Video Transmitter and Receiver for Car Rear View Camera XRD0091 With this wireless module, it is no need to lead wire from the front to back of car, so it will save many camera installation job and it will more easy for you to install camera. 100% brand new, high quality Easy installation Take one minute get your camera become a wireless camera Wireless 2.4GHz transmitter/ receiver set (12-Volt for vehicle installation) Work range: up to about 50m (Hollowness) Fit all RCA composite video connections Power: DC 12V Transmitter/ Receiver cable length: 1.5m How to Install a Camera with the Wireless Module: Take out your stock license plate light at the back of your car. Fix the camera to where the stock license plate light was. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative Connect the wireless module (receiver) to your car monitor - yellow plug for AV input. Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative You will see the images when your reverse car. Package Includes: 1 x 2.4Ghz Transmitter 1 x 2.4Ghz Receiver |