Auto Cooling Healthy Seat Cushion (Simple Type)
汽车冷却健康坐垫（简易型）
AUTO汽车冷却座椅靠垫汽车使用
说再见A股火爆！ 带上一丝丝清凉！
感谢您购买我们的compang的高科技产品---汽车空调保健坐垫。 前请仔细阅读本说明书使用它，并正确使用该产品。 然后，请保存好，以这个指令以后反复阅读。
汽车空调保健坐垫包：
五颜六色的包装盒的空调座垫。 座垫本体，开关控制器，USB车载电源，USB电源线，产品的使用说明（本文）
汽车空调保健坐垫产品原理：
通过使用低功耗空调调节冷却是在汽车空调保健座垫的下部安装到吸入大量的汽车空调健康内部衬垫的新鲜冷风空气风扇 关心座垫，让这是通过空气传导人体和座垫输入的外部环境产生的热量。 特殊坐垫支架不仅可以保证衬垫灵活性，但也能承受120公斤的重量，因此，它也能保证空调座垫的空气循环，即使你坐在座垫很长一段时间。 该机构将不会感到闷热，不舒服，因为体温和汗水; 超低功耗，节能，环保，安装方便，操作简单的产品; 因此，让居住者感觉很舒服，为了防止因长期驾驶每一种疾病，保持健康！ 为确保行车安全。
本产品的安装：
根据常规方法将固定到汽车座椅请将此汽车空调保健座垫产物。 然后把与附属带的坐垫和扣扣固定在座椅靠背和枕头和座椅座垫的下面。 最后，连接相关的导线和开关控制器，并与附件车载充电器相连。 确认连接无误，就把车充电器的另一端插入点烟器，打开车钥匙开关，您可以享受坐垫凉爽的风，为您带来丝丝凉意。 让你行车安全和舒适。
该产品的安装，请参阅风扇的2个片段在参照画面的本体基础。 把2剪辑成固定2环。 请aparting和清洁前，打开坐垫外侧的拉链，发现风扇基地2个夹子，用手指按压，并用另一只手拔出来，可aparting风扇底座。
注意事项：
•要avoidingh风扇出现故障，请不要用手指和棍棒或其他相关的东西入了迷。
•请注意，当使用冷却座垫来控制汽车级温度。 该产品的控制器具有强大的文件，中文件和弱档，请根据你的身体的健身适应它。 可以通过太爽了气垫避免伤害身体的原因。
•请不要用在垫子上强劲的动力践踏，因为坐垫是软的，否则可能会导致缓冲内的裂缝进而影响通风的功能。
•请不要切断坐垫外布硬物或因吸烟burnting一个洞布会导致散热垫的效果并不goog。
•请勿堵塞风扇的空气入口，以便避免badventilation。
•由于车系的设计类型的不同，特别提醒您，当您的车辆总电源键开关闭合，检查座垫是否仍在继续运行，如果运行，请确认车充从点烟器插座拔出的粉丝 为了保护您的汽车的动力电池。
保修时间：自购买之日起12个月内电器配件
产品规格：
车身尺寸：宽度：45厘米; 长度：120厘米
重量：0.80KG
消耗功率：1.5W 5V或12V
电源，车载5V或12V
AUTO CAR COOLING SEAT CUSHION FOR CAR USE
Saying good-bye to a shares hot ! Bring a cool fishes!
Thank you for purchasing our compang's high-tech products--- automobile air-condition health care seat cushion. Please read this instructions carefully before use it and using the product correctly. Then please keep this instructions well in order to read it repeatedly later.
Automobile air-condition health care seat cushion package:
colorful packing box of air-condition seat cushion. seat cushion ontology, switch controller, USB car power, USB power cord, product's using instructions (this paper)
The product principle of automotive air-condition health care seat cushion :
By using the low power consumption air-condition adjust cooling fan which is installing at the lower part of the automotive air-condition health care seat cushion to sucking in a large amount of fresh cool wind air of the internal cushion of automotive air-condition health care seat cushion, let the heat which is produce by human body and seat cushion input external environment through air conduction. Special cushion bracket not only can guarantee the cushion flexibility but also can bear the weight of 120 KG, thus it also can ensure the air circulation of the air-condition seat cushion even if you sit on the seat cushion for a long time. The body will not feel hot and uncomfortable because the body temperature and sweat; The product of ultra-low power consumption, energy conservation, environmental protection, easy installation and simple operation; Thus let the occupants feel very comfortable, To prevent every disease because of long-term driving , keeping health! To ensure driving safety.
The installation of this product:
Please put this automotive air-condition health care seat cushion product according to the conventional method to placing fixed to the car seat. Then put the cushion with subsidiary band and buckle buckle fixed on the seat back and the following of the pillow and seat cushion. Finally, connecting the related wire and the switch controller, and connected with the accessory car charger. Confirm the connection is correct, put the other end of the car charger insert the cigarette lighter, To open the car key switch, you can enjoy the seat cushion with cool wind to bring you coolness. Make you driving safely and comfortably.
This product's installation please refer to the ontology base of fan's 2 clips in the reference picture. Put the 2 clips into the fixed 2 ring. Please open the outside zipper of the cushion before aparting and cleaning, to find 2 clips of the fan base, use your fingers to press and use the other hand to pull out the base that can be aparting the fan.
Attentions:
•To avoidingh failure of the fan, please do not use fingers and sticks or other related things into the fan.
•Please pay attention to control the automotive temperature when use the cooling seat cushion. The product's controller has strong file, middle file and weak file, please adapting it according to your body's fitness. that can avoid the harm to body cause by too cool cushion.
•Please don't trample with strong power on the cushion since the cushion is soft , Or it may cause the fracture inside the cushion then effect the function of ventilation.
•Please don't cut the cloth outside cushion with hard thing or due to smoking burnting a hole in the cloth will lead to the effect of cooling cushion is not goog.
•Please do not block the air inlet of the fan, so as to avoid the badventilation.
•Because the difference of car lines's design type, special remind you when your total vehicle power key switch closed, check the fan of the seat cushion whether is still continues running, If running, please confirm the car charge pulled out from the cigarette lighter socket, in order to protect your car power-battery.
Warranty time: electrical parts within 12 months from the date of purchase
Product specifications:
Body size: width: 45cm; length: 120cm
Weight: 0.80KG
Power consumption: 5V 1.5W or 12V
Electricity source, vehicle-mounted 5V or 12V
