Outdoor UPS 700VA 500W with IP65 Protection Level for Telecom Base Station Application
户外UPS 700VA 500W，IP65防护等级，适用于电信基站应用
系统介绍
DPS-H系列是工业级户外集成DC / AC电源系统的备用电源，内置480Wh锂离子电池（电池容量可根据客户要求增加），体积小，重量轻，易于安装，电源系统的外观和安装根据其传统状态进行升级，具有小型化设计和分布式安装，您不必担心负载和空间的问题。
产品特点
1备份电源集成设计，采用LiFePO4电池技术，体积小，重量轻，可快速部署。
2外壳采用全密封设计，防护等级达IP65，可在恶劣环境下长期使用。
3外壳表面有凹槽轮廓，自然散热。
4整机外壳采用金属材料铸造，具有强度高，重量轻的特点。
5，电池传输效率高，节能减排。
应用场景
1室内场景：可以安装在狭窄空间的地方，如弱电筒仓，走廊，地下车库，为机柜子系统和网络设备提供备用电源。
2户外场景：可以安装在户外恶劣环境下，如灯杆，塔，为RRU，户外AP设备提供备用电源。
3其他场景：为安全防护系统，户外数据采集系统和交通监控系统提供灵活可靠的户外备用电源。
规范
设备类型：壁挂式交流电源
输入容量：700VA / 500W
输入电压：176Vac〜264Vac
输入频率：50Hz±10％
输出电压：220V±2％（电池模式）
波形;纯正弦波
转移时间： <10ms
电池类型：内置48V 10Ah锂离子电池
电池充电电流：2A
通讯接口：干接点/以太网端口/串口
监控：IP网络监控，短信数据传输，DTU。
DPS-H系列是工业级户外集成DC / AC电源系统的备用电源，内置480Wh锂离子电池（电池容量可根据客户要求增加），体积小，重量轻，易于安装，电源系统的外观和安装根据其传统状态进行升级，具有小型化设计和分布式安装，您不必担心负载和空间的问题。
产品特点
1备份电源集成设计，采用LiFePO4电池技术，体积小，重量轻，可快速部署。
2外壳采用全密封设计，防护等级达IP65，可在恶劣环境下长期使用。
3外壳表面有凹槽轮廓，自然散热。
4整机外壳采用金属材料铸造，具有强度高，重量轻的特点。
5，电池传输效率高，节能减排。
应用场景
1室内场景：可以安装在狭窄空间的地方，如弱电筒仓，走廊，地下车库，为机柜子系统和网络设备提供备用电源。
2户外场景：可以安装在户外恶劣环境下，如灯杆，塔，为RRU，户外AP设备提供备用电源。
3其他场景：为安全防护系统，户外数据采集系统和交通监控系统提供灵活可靠的户外备用电源。
规范
设备类型：壁挂式交流电源
输入容量：700VA / 500W
输入电压：176Vac〜264Vac
输入频率：50Hz±10％
输出电压：220V±2％（电池模式）
波形;纯正弦波
转移时间： <10ms
电池类型：内置48V 10Ah锂离子电池
电池充电电流：2A
通讯接口：干接点/以太网端口/串口
监控：IP网络监控，短信数据传输，DTU。
System introduction
DPS-H series is an industrial grade outdoor integrated DC/AC power system for backup power, with built-in 480Wh lithium-ion battery(the capacity of the battery can be increased as per customer' s requirements), small volume, light weight, easy installation, the appearance and Installation of the power system were upgraded based on its traditional status, with miniaturization design and distributed installation, you needn' t to worry about the issues of load-bearing and space.
Product features
1Integrated design for backup power, adopt LiFePO4 battery technology, small volume, light weight, can be fast deployed.
2The outer case adopt full sealed design, with IP65 protection level, it can be used for long time in severe environment.
3The surface of outer case with groove profile for natural heat dissipation.
4The whole outer case is casting with metal material, has high intensity and light weight features.
5The battery has high transfer efficiency, energy conservation and emission reduction.
Application scenarios
1Indoor scene: can be wall-mounted on the narrow space places, such as weak current silo, corridor, underground garage, and provide backup power for chamber subsystem and network equipment.
2Outdoor scene: can be pole-mounted on outdoor severe environments, such as lamp pole, tower, and provide backup power for RRU, outdoor AP equipment.
3Other scene: provide flexible and reliable outdoor backup power for security and protection system, outdoor data collection system and traffic surveillance and control system.
Specification
Equipment type: Wall-mounted AC power supply
Input capacity: 700VA/500W
Input voltage: 176Vac~ 264Vac
Input frequency: 50Hz±10%
Output voltage: 220V±2%(battery mode)
Wave form; Pure sine wave
Transfer time: <10ms
Battery type: Built-in 48V 10Ah lithium ion battery
Battery charging current: 2A
Communication interface: Dry contact/Ethernet port/serial port
Monitoring: IP network monitoring, SMS message data transmission, DTU.
DPS-H series is an industrial grade outdoor integrated DC/AC power system for backup power, with built-in 480Wh lithium-ion battery(the capacity of the battery can be increased as per customer' s requirements), small volume, light weight, easy installation, the appearance and Installation of the power system were upgraded based on its traditional status, with miniaturization design and distributed installation, you needn' t to worry about the issues of load-bearing and space.
Product features
1Integrated design for backup power, adopt LiFePO4 battery technology, small volume, light weight, can be fast deployed.
2The outer case adopt full sealed design, with IP65 protection level, it can be used for long time in severe environment.
3The surface of outer case with groove profile for natural heat dissipation.
4The whole outer case is casting with metal material, has high intensity and light weight features.
5The battery has high transfer efficiency, energy conservation and emission reduction.
Application scenarios
1Indoor scene: can be wall-mounted on the narrow space places, such as weak current silo, corridor, underground garage, and provide backup power for chamber subsystem and network equipment.
2Outdoor scene: can be pole-mounted on outdoor severe environments, such as lamp pole, tower, and provide backup power for RRU, outdoor AP equipment.
3Other scene: provide flexible and reliable outdoor backup power for security and protection system, outdoor data collection system and traffic surveillance and control system.
Specification
Equipment type: Wall-mounted AC power supply
Input capacity: 700VA/500W
Input voltage: 176Vac~ 264Vac
Input frequency: 50Hz±10%
Output voltage: 220V±2%(battery mode)
Wave form; Pure sine wave
Transfer time: <10ms
Battery type: Built-in 48V 10Ah lithium ion battery
Battery charging current: 2A
Communication interface: Dry contact/Ethernet port/serial port
Monitoring: IP network monitoring, SMS message data transmission, DTU.
