共线负载试验350kg，800磅
双电压12或24V DC（可选）
完成后，标准电压为12V DC
MOV提供反向电流保护
适用于木门，玻璃门，金属门，防火门
LED指示门状态
锁定状态传感器（no / nc / com）
时间：5/10/20/30秒
抗残磁设计
高强度材料，阳极氧化铝外壳
设计无机械故障
增加保持力，双绝缘外壳
CE认证由欧盟，MA证书由中国公安办公室
锁尺寸：285lx55wx27.5h（mm）
电枢板：190lx45wx11h（mm）
保压力：350kg（800lbs）
电压：12或24V DC
电流消耗：12V / 480mA或24V / 240mA
信号输出：干触点，触点最大额定电流3A
LED：红色表示门已解锁，绿色表示门已锁定
蜂鸣器：5/10/20/30秒
适用于木门，玻璃门，金属门，防火门
表面温度：≤20°C
工作温度：-10-55°C（14-131°F）
适用湿度：0-95％（非冷凝）
外壳表面：阳极氧化铝
磁性表面处理：锌
电枢表面处理：锌
重量：2.7kg

Collinear load test 350kg, 800 pounds
Dual voltage 12 or 24V DC (optional)
The standard voltage is 12V DC when finished
MOV provides reverse current protection
Suitable for wooden door, glass door, metal door, fireproof door
LED indicates the door status
Lock status sensor (no/nc/com)
Time: 5/10/20/30sec
Anti-residual magnetism designed
High strength material, anodized aluminum housing
Design without mechanical failure
Increase the holding force, dual insulative housing
CE-certified by European union, MA certificate by China public security office
Lock size: 285lx55wx27.5h(mm)
Armature plate: 190lx45wx11h(mm)
Holding force: 350kg(800lbs)
Voltage: 12 or 24V DC
Current draw: 12V/480mA or 24V/240mA
Signal output: dry contact, maximum rating of contact current 3A
LED: red indicates the door is unlock, green indicates the door is lock
Buzzer: 5/10/20/30sec
Suitable for wooden door, glass door, metal door, fireproof door
Surface temperature: ≤20°C
Operating temperature: -10-55°C (14-131°F)
Suitable humidity: 0-95%(non-condensing)
Finishes for shell: anodized aluminum
Finishes for magnetic: zinc
Finishes for armature: zinc
Weight: 2.7kg