注意：仅在美国销售（不包括阿拉斯加，夏威夷和波多黎各）。

特征：

★高强度压力锌合金压铸头，高强度热处理弹簧，确保灌注时持久的压力。

★油咀特殊设计，增加球，确保油的作业不返回。

★本产品采用锐角设计，在小范围内全面运行。

★填充黄油后，排气阀可释放管中积聚的空气。

★加油头用于从油箱中加油。

★使用空气压力在30至150PSI，每按一次触发器可产生1200至6000PSI的压力。

产品规格：

名称：气动油枪

容量：400CC

入口：1 / 4''PT

需要气压：30〜150PSI

外压：1200〜600PSI

直径：3/8“

平均空气消耗：6CFM

注意：

如果新买气枪不能正常使用，因为枪有空气积聚。转动一圈或一圈的尖端。

操作如下：

1.将压力活塞拉到顶部，并快速释放，重复几次，使橡胶圈内的压力累积到插入件中。

2.压力阀泄漏数次，放开空气。

包装包括：

1 *气动油枪

2 *配件

Note: Only sales in the USA(not include Alaska, Hawaii, and Puerto Rico).

Features:

★High-strength pressure zinc alloy die-casting head, high-strength heat treatment spring, to ensure a lasting pressure when perfusion.

★Oil Tsui special design, increase the ball, to ensure that the work of oil does not return.

★This product was sharp angle design, in a small space within the full range of operation.

★After filling the butter, the vent valve can release the accumulated air in the tube.

★The oil filler head is used to fill the oil from the tank.

★Use the air pressure at 30 to 150PSI, each press the trigger can produce 1200 to 6000PSI pressure.

Product Specifications:

Name: Pneumatic grease gun

Capacity: 400CC

Inlet: 1 / 4''PT

Need air pressure: 30 ~ 150PSI

External pressure: 1200 ~ 600PSI

Diameter: 3/8 ''

Average air consumption: 6CFM

Note:

If the new buy pneumatic gun can not be used normally, because the gun has air accumulation. Turn the tip of a lap or a lap.

The operation is as follows:

1. Pull the pressure piston to the top, and quickly release, repeat several times, so that the accumulation of pressure to the rubber ring into the insert.

2. Leak the valve under pressure several times, let go of the air.

Packaging includes:

1 * Pneumatic grease gun

2 * accessories