3.5 Inches Cvi, Tvi, Ahd, Analogue All-in-One CCTV Tester
3.5英寸Cvi，Tvi，Ahd，模拟一体式闭路电视测试仪
描述：
3.5'HVGA TFT-LCD屏幕显示/ 480（RGB）* 320分辨率/高清同轴测试（CVI / TVI / AHD）/ PTZ控制/彩条发生器/ 12V 1A电源输出。
新的HD同轴测试仪是为同轴摄像机的现场安装和维护而开发的，它还结合了其他功能模拟摄像机测试，模拟信号输出，端口探测器，UTP测试，数字万用表，光功率计和TDR电缆测试仪等。其可移植性，用户友好的设计和许多其他功能使测试仪成为所有安装人员或技术人员的必备工具。
应用：
1，CCTV系统安装维护
2，网络布线工程安装和维护
3，圆顶相机一体模拟，AHD，CVI，TVI和HD SDI摄像机测试
4，视频传输通道测试
5，云台控制器
特征：
1）3.5英寸屏幕显示，480（RGB）x320分辨率
2）功耗低，工作时间长达11小时
3）LCD屏亮度/对比度/色彩饱和度可调NTSC / PAL自动调整
4）一体化模拟，AHD，CVI，TVI同轴摄像机图像显示，同轴云台控制和调用摄像机OSD菜单
5）增强的彩条发生器，PAL / NTSC多系统彩条视频发生器（八系统可切换，发送/接收八系统彩色图像）。
6）LED手电筒。
7）高清同轴控制，云台控制，彩条发生器快捷键。
8）F1，F2用户自定义键
9）视觉故障定位仪，测试光纤的弯曲和断裂*（可选）
10）数字万用表，直流和交流电压测量，电阻测量连续性测试，二极管测量，电容测量*（可选）
11）电缆跟踪器通过发送音频信号，使蓝色电缆跟踪器测试仪从杂乱的电缆找到连接的电缆。 * （可选的）
12）端口查找器，它将使安装程序能够方便快捷地找到以太网电缆的连接端口。
13）TDR电缆测试，TDR断点和短路测量。 * （可选的）
14）PTZ控制和PTZ协议分析
15）将显示电缆测试，测试LAN电缆或电话电缆，UTP电缆等，电缆类型和电缆的顺序
16）支持超过30种协议，如Pelco-D，Pelco-P，SAMSUNG。
17）支持RS232 / RS485，速率600〜115200bps可调
18）内置锂离子聚合物电池（3.7V DC 3000mAh）
19）图像显示和数据控制集成
20）手持式HD同轴测试仪，便于携带和操作。
21）光功率计，测试光纤损耗和值*（可选）
3.5'HVGA TFT-LCD屏幕显示/ 480（RGB）* 320分辨率/高清同轴测试（CVI / TVI / AHD）/ PTZ控制/彩条发生器/ 12V 1A电源输出。
新的HD同轴测试仪是为同轴摄像机的现场安装和维护而开发的，它还结合了其他功能模拟摄像机测试，模拟信号输出，端口探测器，UTP测试，数字万用表，光功率计和TDR电缆测试仪等。其可移植性，用户友好的设计和许多其他功能使测试仪成为所有安装人员或技术人员的必备工具。
应用：
1，CCTV系统安装维护
2，网络布线工程安装和维护
3，圆顶相机一体模拟，AHD，CVI，TVI和HD SDI摄像机测试
4，视频传输通道测试
5，云台控制器
特征：
1）3.5英寸屏幕显示，480（RGB）x320分辨率
2）功耗低，工作时间长达11小时
3）LCD屏亮度/对比度/色彩饱和度可调NTSC / PAL自动调整
4）一体化模拟，AHD，CVI，TVI同轴摄像机图像显示，同轴云台控制和调用摄像机OSD菜单
5）增强的彩条发生器，PAL / NTSC多系统彩条视频发生器（八系统可切换，发送/接收八系统彩色图像）。
6）LED手电筒。
7）高清同轴控制，云台控制，彩条发生器快捷键。
8）F1，F2用户自定义键
9）视觉故障定位仪，测试光纤的弯曲和断裂*（可选）
10）数字万用表，直流和交流电压测量，电阻测量连续性测试，二极管测量，电容测量*（可选）
11）电缆跟踪器通过发送音频信号，使蓝色电缆跟踪器测试仪从杂乱的电缆找到连接的电缆。 * （可选的）
12）端口查找器，它将使安装程序能够方便快捷地找到以太网电缆的连接端口。
13）TDR电缆测试，TDR断点和短路测量。 * （可选的）
14）PTZ控制和PTZ协议分析
15）将显示电缆测试，测试LAN电缆或电话电缆，UTP电缆等，电缆类型和电缆的顺序
16）支持超过30种协议，如Pelco-D，Pelco-P，SAMSUNG。
17）支持RS232 / RS485，速率600〜115200bps可调
18）内置锂离子聚合物电池（3.7V DC 3000mAh）
19）图像显示和数据控制集成
20）手持式HD同轴测试仪，便于携带和操作。
21）光功率计，测试光纤损耗和值*（可选）
Description:
3.5' HVGA TFT-LCD screen display/480(RGB)*320 resolution/HD coaxial test (CVI/TVI/AHD)/PTZ control/Color bar generator/12V 1A power output.
The new HD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera, it also combine other functions analog camera test, analog signal output, port finder, UTP test, digital multimeter, optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the tester an essential tool for all installers or technicians.
Applications:
1,CCTV system installation and maintenance
2,Network cabling project installation and maintenance
3,Dome camera all in one Analog, AHD, CVI, TVI and HD SDI camera testing
4,Video transmission channel testing
5,PTZ controller
Features:
1) 3.5 inch screen display, 480(RGB)x320 resolution
2) Low power consumption, working time lasts 11 hours
3) LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
4) All in one Analog, AHD, CVI, TVI coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
5) Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
6) LED Flashlight.
7) HD coaxial control, PTZ control, color bar generator shortcut key.
8) F1, F2 user-defined key
9) Visual fault locator, to test fiber's bending and breakage * (Optional)
10) Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)
11) Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. * (Optional)
12) Port Finder,it will enable the installer to easily and quickly find the connected port for an Ethernet cable.
13) TDR cable test, TDR break-point and short-circuit measurement. * (Optional)
14) PTZ control and PTZ protocol analysis
15) Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed
16) Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.
17) Support RS232/RS485,rate 600 ~ 115200bps adjustable
18) Built in Lithium Ion Polymer Battery(3.7V DC 3000mAh )
19) Image display and data control integration
20) Handheld HD coaxial tester, easy to carry and operation.
21) Optical power meter, test fiber loss and value * (Optional)
3.5' HVGA TFT-LCD screen display/480(RGB)*320 resolution/HD coaxial test (CVI/TVI/AHD)/PTZ control/Color bar generator/12V 1A power output.
The new HD coaxial tester is developed for the On-Site installation and maintenance of coaxial camera, it also combine other functions analog camera test, analog signal output, port finder, UTP test, digital multimeter, optical power meter and TDR cable tester etc. Its portability, user-friendly design and many other functions make the tester an essential tool for all installers or technicians.
Applications:
1,CCTV system installation and maintenance
2,Network cabling project installation and maintenance
3,Dome camera all in one Analog, AHD, CVI, TVI and HD SDI camera testing
4,Video transmission channel testing
5,PTZ controller
Features:
1) 3.5 inch screen display, 480(RGB)x320 resolution
2) Low power consumption, working time lasts 11 hours
3) LCD screen brightness/contrast/color saturation adjustable NTSC/PAL auto adjust
4) All in one Analog, AHD, CVI, TVI coaxial camera image display, coaxial PTZ control and call up the camera OSD menu
5) Enhanced Color bar generator, PAL/NTSC multi-system color bar video generator (Eight-system switchable, transmit/receive eight-system colorful images).
6) LED Flashlight.
7) HD coaxial control, PTZ control, color bar generator shortcut key.
8) F1, F2 user-defined key
9) Visual fault locator, to test fiber's bending and breakage * (Optional)
10) Digital Multi-meter, DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)
11) Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. * (Optional)
12) Port Finder,it will enable the installer to easily and quickly find the connected port for an Ethernet cable.
13) TDR cable test, TDR break-point and short-circuit measurement. * (Optional)
14) PTZ control and PTZ protocol analysis
15) Cable test, Test LAN cable or telephone cable, UTP cable etc, cable type and the sequence of wires will be displayed
16) Support more than 30 protocols, such as Pelco-D, Pelco-P, SAMSUNG.
17) Support RS232/RS485,rate 600 ~ 115200bps adjustable
18) Built in Lithium Ion Polymer Battery(3.7V DC 3000mAh )
19) Image display and data control integration
20) Handheld HD coaxial tester, easy to carry and operation.
21) Optical power meter, test fiber loss and value * (Optional)
