Dimmable 18W 2G11 LED PL Tubes

Dimmable 18W 2G11 LED PL Tubes

可调光18W 2G11 LED PL管

1000+
6.5-7 USD

加入意向
规范:
•部件号:HL-PLL18W
•说明:2G11 18W可调光LED灯管(PL-L)
•基本尺寸:38x17x417mm
•材料:铝外壳+乳白色或透明PC盖
•基座:2G11 4PIN基座
•LED:LM80星形0.5W 2835 LED x 48pcs
•输入:85-135V AC或195-265V AC,50 / 60Hz,PF> 0.9,可调光
•85-300V交流输入电压可用(PF≥0.9,不可调光)
•功率:18W
•输出通量:1750-1900lm,100lm / W
•视角:160deg。
•光束颜色(CCT):2700K-7000K可用
•cri(ra):> 80
•更换:PL-L-36W节能灯
•包装:彩盒

特征:
•类似尺寸和更高的流明至PL-L CFL,易于更换
•铝制外壳,散热良好
•过压和过热保护,0-100%可调光。
•高通量效率,高PF和Ra
•即时开启,无噪音,无闪光,无紫外线和红外线
•开关周期:≥15000
•流明维持在6000小时:≥90%
•工作温度范围:-25°C - 45°C
•使用寿命长达50,000小时以上
•三年有限保修
•符合CE,RoHS标准

警告:
•不能在全封闭灯具中使用
•干燥位置
•不要混淆12V,120V,230V,277V输入电压。
•电子镇流器必须旁路。
其他:
•请贴上标签“该灯具的未来重新灯泡需要使用自镇流LED灯。镇流器已经在灯具上的这个夹具旁路。
零件号hl-pl19whl-pll12whl-pl118whl-pl120whl-pl122whl-p1122w-b
描述9W,12W,18W,22W可调光2G11 LED PL管,PF> 0.95,100Lm / W,160°
材料铝外壳+ PC盖(透明或乳白色),2G11 4PIN基座
LEDepistar 0.5w 2835 smd led,cct:2700k〜7000k,ra≥80
电压85〜135VAC或195〜265VAC,50 / 60Hz,PF> 0.95,0〜100%可调光
基本尺寸38x17x22738x17x32238x17x41738x17x41738x17x54238x17x571
领导数量。24pcs36pcs48pcs48pcs60pcs60pcs
电源(PD)8.0W12.0W18.0W20.0W22.0W22.0W
助焊剂750〜900Lm1150〜1300Lm1750〜1900Lm2000〜2200Lm2200〜2500Lm2200〜2500Lm
更换PLLpl-1-18wp1-24wpl-1-36wpl-1-40wp1-15w40 / 50w(美国)
报价MOQ 1000pcs,彩盒包装
其他•过电压和过热保护
•不能在全封闭灯具中使用
•干燥位置
•不要混淆12V,120V,230V,277V输入电压。
•电子镇流器必须旁路。








Specification:
• Part number: HL-PLL18W
• Description: 2G11 18W dimmable LED PL tubes (PL-L)
• Basic size: 38x17x417mm
• Materials: aluminum housing + milky or clear PC cover
• Base: 2G11 4PIN base
• LED: LM80 Epistar 0.5W 2835 LED x 48pcs
• Input: 85-135V AC or 195-265V AC, 50/60Hz, PF﹥0.9, dimmable
• 85-300V AC input voltage available (PF≥0.9, non-dimmable)
• Power: 18W
• Output flux: 1750-1900lm, 100lm/W
• Viewing angle: 160deg.
• Beam color (CCT): 2700K-7000K available
• CRI (Ra): ﹥80
• Replace: PL-L-36W energy saving lamp
• Package: color box

Features:
• Similar size and higher lumens to PL-L CFL, easy to replace
• Aluminum housing with good heat dissipation
• Overvoltage and overheating protection, 0-100% dimmable.
• High flux efficacy, high PF and Ra
• Instant on, no noise, no flash, no UV and IR
• Switching cycles: ≥15000
• Lumens maintenance at 6000Hrs: ≥90%
• Operating temperature range: -25°C - 45°C
• Long lifespan up to more than 50,000 hours
• Three years limited warranty
• Comply with CE, RoHS standards

Caution:
• Can't be used in fully enclosed luminaires
• Dry location only
• Don't confuse 12V, 120V, 230V, 277V input voltage.
• Electronic ballast must be bypassed.
Others:
• Please put label 'future re-lamping of this luminaire requires the use of a self-ballasted LED lamp. The ballast has been bypassed in this fixture' on fixtures.
Part numberHL-PLL9WHL-PLL12WHL-PLL18WHL-PLL20WHL-PLL22WHL-PLL22W-B
Description9W,12W,18W,22W dimmable 2G11 LED PL tubes, PF﹥0.95, 100Lm/W, 160°
MaterialsAluminum housing + PC cover (Clear or Milky), 2G11 4PIN base
LEDEpistar 0.5W 2835 SMD LED, CCT: 2700K~7000K, Ra ≥80
Voltage85~135VAC or 195~265VAC, 50/60Hz, PF﹥0.95, 0~100% dimmable
Basic size38x17x22738x17x32238x17x41738x17x41738x17x54238x17x571
LED QTY.24pcs36pcs48pcs48pcs60pcs60pcs
Power (PD)8.0W12.0W18.0W20.0W22.0W22.0W
Flux750~900Lm1150~1300Lm1750~1900Lm2000~2200Lm2200~2500Lm2200~2500Lm
Replace PLLPL-L-18WPL-L-24WPL-L-36WPL-L-40WPL-L-55W40/50W(USA)
QuotationMOQ 1000pcs, color box package
Others• Overvoltage and overheating protection
• Can't be used in fully enclosed luminaires
• Dry location only
• Don't confuse 12V, 120V, 230V, 277V input voltage.
• Electronic ballast must be bypassed.