Portable Hardness Tester
便携式硬度计
- 优点：
- 体积小，重量轻，携带方便
- 其外形尺寸为212 x 80 x 32mm
- 大屏幕（128 x 64点阵LCD），显示所有功能和参数
- 测试在任何角度，甚至倒置
- 宽测量范围
- 它可以测量所有金属材料的硬度
- 直接显示硬度HRB，HRC，HV，HB，HS，HL和三种类型的强度值立即
- 七个冲击装置可用于特殊应用
- 自动识别冲击装置的类型
- 大容量存储器可以存储500组（相对于平均时间32-1）信息，包括单个测量值，平均值，测试数据，冲击方向，冲击时间，材料和硬度等级
- 上限和下限可以预设
- 当结果值超过限值时，将自动报警
- 电池信息表示电池的剩余容量和充电状态
- 用户校准功能
- USB端口与PC人性化多功能数据处理软件
- 原装进口高速热敏打印机支持立即打印功能
- 它可以永久保存数据
- 镍氢充电电池作为电源
- 用充电电池充电三个小时，可以使用两个月
- 充电电路集成在仪器内部
- 连续工作时间不小于150小时（EL关，无印刷）
- 自动关机以节省能源
- 优良的售后服务体系，为优质产品，两年保修和全生命维护
- 易于购买和使用舒适
- 主要应用：
- 模具模腔
- 轴承等部件
- 压力容器，蒸汽发生器和其他设备的故障分析
- 重工件
- 技术规格：
- 测量范围：HLD（170-960）HLD
- 测量方向：360°
- 硬度标度：h1 / hb / hrb / hrc / hra / hv / hs
- 显示：点阵LCD，128 x 64点
- 数据存储器：最多500组（相对于冲击时间32-1）
- 打印纸：宽度为（57.5±0.5）mm，直径为30mm
- 电池组：6V NiMH
- 电池充电器：9V / 500mA
- 连续工作时间：约150小时（背光关闭，无打印）
- 通讯接口：USB1.1
- 外形尺寸：212 x 80 x 32mm
- Advantages:
- Small volume with lightweight, it is convenient to carry
- Its outline dimensions are 212 x 80 x 32mm
- Large screen (128 x 64 dot-matrix LCD), shows all functions and parameters
- Test at any angle, even upside-down
- Wide measuring range
- It can measure the hardness of all metallic materials
- Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately
- Seven impact devices are available for special application
- Automatically identify the type of impact devices
- Large capacity memory could store 500 groups (relative to average times 32-1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale and more
- Upper and lower limit can be preset
- It will alarm automatically when the result value exceeding the limit
- Battery information indicates the rest capacity of the battery and the charge status
- User calibration function
- USB port with the PC humanity multifunction data proceeding software
- Original imported high-speed thermal printer supports the immediate printing function
- It can save data permanently
- NiMH rechargeable battery as the power source
- With rechargeable battery, charging for three hours, it can be used for two months
- Charge circuit integrated inside the instrument
- Continuous working period of no less than 150 hours (EL off and no printing)
- Auto power off to save energy
- Excellent after-sale service system for high quality products, two-year guarantee and all life maintenance
- Easy to buy and comfortable to use
- Main applications:
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other equipment
- Heavy work piece
- Technical specifications:
- Measuring range: HLD (170-960)HLD
- Measuring direction: 360°
- Hardness scale: HL/HB/HRB/HRC/HRA/HV/HS
- Display: dot-matrix LCD, 128 x 64 dots
- Data memory: 500 groups maximum (relative to impact times 32-1)
- Printing paper: width is (57.5± 0.5)mm, diameter is 30mm
- Battery pack: 6V NiMH
- Battery charger: 9V/500mA
- Continuous working period: about 150 hours (with backlight off, no printing)
- Communication interface: USB1.1
- Outline dimensions: 212 x 80 x 32mm
