SC Fiber Optic Connector with Short Operating Time and Single/Multi-mode Filter

SC Fiber Optic Connector with Short Operating Time and Single/Multi-mode Filter

SC光纤连接器，具有短工作时间和单/多模滤波器

1000+
3-5 USD

加入意向
技术参数：
    适用于Φ0.90mm光纤光纤直径：125μm（652和657）缓冲直径：900μm光纤模式：单模和多模操作时间：约60s（不含光纤切割）插入损耗：≤0.3dB（1,310nm和1,550nm）回波损耗：≤-40dB裸纤维的保光强度：> 5N裸纤维支架的硬化强度：> 10NTensens强度：> 50NS热/工作温度：-40 to 75℃在线抗拉强度（20N）：△IL≤0.3dB/△ RL≤5dB机械耐久性（500次）：△IL≤0.3dB/△RL≤5dB脱落试验（脱落高度4m，每个方向一次，共3次）：△IL≤0.3dB/△RL≤5dB
描述：
    基于可插拔非预设管技术另一端精确劈裂并放入我们的机械接头的机制两个现场光纤和光纤接头完全保护免受环境因素，特别适合FTTX
特征：
    低插入损耗和背反射损失极短的工作时间短工作时间无需环氧树脂或抛光（用于PC）直接连接ONU没有任何光插座，这降低了FTTH成本

Technical parameters:
    Applicable for Φ0.90mm fiberOptical fiber diameter: 125μm (652 and 657)Tight buffer diameter: 900μmFiber mode: single and multi-modeOperation time: about 60s (no including fiber cutting)Insert loss: ≤0.3dB (1,310nm and 1,550nm)Return loss: ≤-40dBFastening strength of naked fiber: ﹥5NFastening strength of naked fiber holder: ﹥10NTensile strength: ﹥50NStorage/operating temperature: -40 to 75℃On-line tensile strength (20N): △IL ≤0.3dB/△RL ≤5dBMechanical durability (500 times): △IL ≤0.3dB/△RL ≤5dBDrop-off test (drop-off height 4m, once per direction, totally 3 times): △IL ≤0.3dB/△RL ≤5dB
Descriptions:
    Based on the pluggable non-preset tube technologyThe other end is precisely cleaved and placed into mechanism of our mechanical spliceBoth the field fiber and fiber stub are fully protected from environmental factors, specially fits into FTTX
Features:
    Low insertion loss and back reflection lossExtremely easy for operationShort operating timeNo need of epoxy or polishing (for PC)Directly connected with ONU without any optical socket, which reduces FTTH cost