200W LED High Bay Light, Power factor﹥=0.95, 85-265V AC/DC12-24V, Bridgelux chip

200W LED High Bay Light, Power factor﹥=0.95, 85-265V AC/DC12-24V, Bridgelux chip

200W LED工矿灯，功率因数> = 0.95，85-265V AC / DC12-24V，Bridgelux芯片

议价

加入意向
  • 产品规格：
    • 功率：200W
    • 电压：85-265V AC
    • 功率因数：> = 0.95
    • 使用寿命：> 50,000小时
    • cri：> 72ra
    • LED芯片：可选
    • 流明效率：
      • 创世芯片：80lm / W
      • 表面芯片：80lm / W
      • Bridgelux芯片：90lm / W
    • 色温：
      • 暖白色：2,700-3,200K
      • 白天：3,500-5,000K
      • 白色：5,500-7,000K
    • 中性包装：1件/箱
    • 保修：3年
    • 铝
    • 尺寸：460 * 625mm
    • 光束角：120°
    • 认证：CE
  • 优点：
    • 优点：

      首先，每个LED高棚灯由3个主要部件组成，LED芯片，LED驱动器和灯壳，99％的照明厂房买LED灯壳和LED芯片从LED芯片厂和灯壳厂，我们可以生产驱动器我们自己。只有5％的照明厂可以自己生产LED驱动器，所以在同等质量下，我们的价格将比我们的竞争对手低很多，

      其次，我们的LED远光灯的功率因数> 0.95。但我们的竞争对手只能使功率因数> 0.5。电源工厂对电子节能非常重要，我们的LED工矿灯功率因数大于0.95，我们的LED工矿灯可以传输95％的电子能量作为照明，但我们的竞争对手只能转50％。我们开发和出口LED驱动器10多年。这就是为什么可以使功率因数> 0.95，其他照明工厂只能使功率因数> 0.5

      第三，我们的LED工矿灯的所有螺丝都是不锈钢。可以使用长时间。但其他工厂使用铁scres。经过很长时间，铁螺丝很快被天气破坏。

      最后，我们的LED工矿灯的所有电缆都是硅胶线，其他工厂只使用PC电缆。当天气温度高于+ 40℃或低于-10℃时
      ℃。 PC电缆将断开。但我们的硅胶电缆可以在该温度下工作：-55℃ - + 60℃。我们有国际标准的高低温试验设备进行试验

      第五，我们为客户提供真正的瓦。有些工厂使用坏芯片，例如使用120W灯壳。但芯片只是110W。前景相同的120W LED工矿灯，但恰恰是它只有110W LED芯片。问题我们从一些我们的客户知道从其他LED照明工厂进口LED灯，

      第六。我们给您真正优质的驱动器零件，最大的LED进口备件是LED驱动器，Beacuse LED驱动器里面有许多小型，高科技的备件，但客户不容易


  • Specifications:
    • Power: 200W
    • Voltage: 85-265V AC
    • Power factor: ﹥=0.95
    • Lifespan: ﹥50,000 hours
    • CRI: ﹥72Ra
    • LED chip: optional
    • Lumen efficiency:
      • Genesis chip: 80lm/W
      • Epistar chip: 80lm/W
      • Bridgelux chip: 90lm/W
    • Color temperature:
      • Warm white: 2,700-3,200K
      • Day white: 3,500-5,000K
      • White: 5,500-7,000K
    • Neutral packing: 1 piece/carton
    • Warranty: 3 years
    • Aluminum
    • Size: 460*625mm
    • Beam angle: 120°
    • Certifications: CE
  • Advantages:
    • Advantages:

      Firstly ,Each LED high-bay light is consisted with 3main parts , LED chip ,LED driver and Lamp housing , 99% Lighting factory buy the Lamp housing and LED chip from the LED chip factory and Lamp housing factory , We can produce the driver by ourselves . Just 5% lighting factory can produce the LED driver by themself ,So Under the same quality ,Our price will be much lower than our competitor ,

      Secondly Power factor of our LED High-bay light is ﹥0.95 . But our competior just can make the power factor﹥0.5 . Power factory is very important for electronic energy saving , Our LED High bay light power factor﹥0.95 That meas our LED High-bay lights can transfer 95% electornic energy as lighting ,But our competitor just can transfer 50% . We developing and exporting LED drivers more than 10years . That's why can make the Power factor﹥0.95 ,Other Lighting factories just can make Power factor﹥0.5

      Thirdly ,All the screws of our LED High bay lights is stainless . Can use long time . But other factories use the Iron scres . After a long time later ,The Iron screws are quickly destroyed by the weather .

      Forthly , All the cables of our LED High bay lights are Silicone Wire , The other factories just use PC cable . When the weather temperature more than +40℃ or below -10
      ℃ . The PC cables will be breaked . But our Silicone Cables can work under that Temperature:-55℃ - +60℃. We have the international standard High and low temperature test equipment to test it

      Fifthly , We supply our customers a real watts . Some factories use bad Chip ,For example Use 120W Lamp housing . But the chip is just 110W . The outlook same at 120W LED High bay lights ,But acutally it is just with 110W LED chips . The problem We know from some of our customers who imported LED lights from other LED lighting factories before ,

      Sixthly . We give you Real good quality driver spare parts, The Most import spare parts of LED High bay light is the LED driver , Beacuse LED driver's inside with many small ,high technology spare parts , But customers not eas