Professional pH/mV Conductivity/DO Meter
专业pH / mV电导率/ DO仪表
议价
加入意向- 该仪表是与最先进的电子技术，传感器技术和软件设计的完美结合。该仪器可以测量高精度水溶液的pH，mV，电导率，TDS，盐度，电阻率，DO和温度的参数。它是最好的便携式水质分析仪，具有最高的性能和最低的成本。适用于矿山，发电，水处理，环境保护等领域的应用和现场试验。
- pH
- 测量范围：（ - 2.00〜19.99）pH
- 分辨率：0.1 / 0.01 pH
- 精度：米：±0.01pH;总体：±0.02pH
- 输入电流：d2×10-12 A
- 输入阻抗：e1×1012©
- 稳定性：±0.01 pH / 3h
- 温度。补偿范围：（0〜100）（自动）
- mV：（探头可选）
- 测量范围：-1999mV至0至1999mV
- 分辨率：1mV
- 精度：±0.1％FS
- 电导率
- 0.00〜19.99¼S/ cm; 20.0〜199.9¼S/ cm; 200〜1999μS/ cm
- 2.00〜19.99mS / cm; 20.0〜199.9mS / cm
- tds：0〜100g / l
- 盐度：0〜100ppt
- 电阻：0〜100M©* cm
- 分辨率：0.01 / 0.1 / 1 / 4S / cm 0.01 / 0.1mS / cm
- 精度：米：±1.0％FS，总体：±1.5％FS
- 温度。补偿范围：0〜50（自动）
- 电极常数：0.1 / 1 / 10cm -1
- 基准温度：25，20和18
- 溶解氧：
- 测量范围：0〜40.00mg / L（ppm）; 0〜200.0％
- 分辨率：0.1 / 0.01mg / L（ppm）; 1 / 0.1％
- 精度：米：±0.10 mg / L，总体：±0.40mg / L
- 响应时间：d30s（25，90％响应）
- 残余电流：d0.1 mg / L
- 温度。补偿范围：0〜45（自动）
- 盐度补偿范围：0〜45ppt（自动）
- 气压：66〜200kPa（手动）
- 自动校准：水饱和空气;水饱和空气
- 电极类型：极谱图类型
- This meter is a perfect combination with the most advancedelectronic technology, sensor technology and software design. Themeter can measure the parameters of pH, mV, conductivity, TDS,salinity, resistivity, DO and temperature for high accuracy watersolutions. It is the best portable water analysis meter with thehighest performance and the lowest cost. It is suitable forindustries such as the mining, power generation, water treatment,environmental protection, and other applications in the field andin spot tests.
- pH
- Measuring range:(-2.00 ~ 19.99) pH
- Resolution:0.1/0.01 pH
- Accuracy: Meter: ±0.01pH; Overall: ±0.02pH
- Input current: d2×10-12 A
- Input impendance: e1×1012 ©
- Stability: ±0.01 pH/3h
- Temp. Compensation Range: (0 to 100) (automatic)
- mV: (probe optional)
- Measuring range: -1999mV to 0 to 1999mV
- Resolution: 1mV
- Accuracy: ±0.1% FS
- Conductivity
- 0.00 ~ 19.99¼S/cm; 20.0 ~ 199.9¼S/cm; 200 ~1999¼S/cm
- 2.00 ~ 19.99mS/cm; 20.0 ~ 199.9mS/cm
- TDS: 0 ~ 100g/L
- Salinity: 0 ~ 100ppt
- Resistance: 0 ~ 100M©·cm
- Resolution: 0.01/0.1/1¼S/cm 0.01/0.1 mS/cm
- Accuracy: Meter: ±1.0% FS, Overall: ±1.5% FS
- Temp. compensation range: 0 ~ 50 (automatic)
- Electrode constant: 0.1 / 1 / 10 cm-1
- Benchmark temperature: 25, 20and 18
- Dissolved Oxygen:
- Measuring range: 0 ~ 40.00mg/L (ppm); 0 ~ 200.0%
- Resolution: 0.1/0.01 mg/L (ppm); 1/0.1%
- Accuracy: Meter: ±0.10 mg/L, Overall: ±0.40mg/L
- Response time: d30 s (25, 90% response)
- Residual current: d0.1 mg/L
- Temp. Compensation Range: 0 to 45 (automatic)
- Salinity Compensation Range: 0 ~ 45ppt (automatic)
- Barometric pressure: 66 to 200kPa (manual)
- Automatic Calibration: Air saturated by water; water saturatedby air
- Electrode type: Polarogram type
