Switching Mode Power Supply with LED Driver, 15W Power and 90 to 264V AC Input
带LED驱动器的开关模式电源，15W功率和90至264V AC输入
议价
加入意向- LED驱动器/电源，15W，90到264V交流输入
- 适用于LED照明和移动标志应用
- 保护：短路，过载和过电压
- CC模式保护
- II类电源（无接地引脚）/通过LPS
- 规范：
- 输入电压：90〜264V AC
- 输入频率：47Hz至63Hz
- 输入电流：最大0.4A
- 浪涌电流：最大80A（冷启动）
- 效率：> = 65％
- 任意输出：21至27V直流
- 保持时间：标称线路时为10mS min
- 纹波：噪声：2％Vp-p最大
- 耐电压：I / PO / P 3,000V AC
- 漏电流：最大0.25mA
- 工作温度：-20至+ 40°C
- 存储温度：-40至+ 85°C
- 保护：OVP / OLP和短路
- 安全标准：IEC / UL / EN60950-1，CB
- emc标准：（en55022，cispr22，fcc第15部分）类别b，en61000-3-2，-3-3，en61000-4-2，3，4，5，6，8，-11
- 标准输出电缆/长度：UL2468，＃20AWG / 5ft
- LED driver/power supply, 15W, 90 to 264V AC input
- Suitable for LED lighting and moving sign applications
- Protections: short-circuit, overload and over-voltage
- CC mode protection
- Class II power (without earth pin)/pass LPS
- Specification:
- Input voltages: 90 to 264V AC
- Input frequencies: 47Hz to 63Hz
- Input current: 0.4A maximum
- Inrush current: 80A maximum (cold start)
- Efficiency: ﹥ = 65%
- Anywhere output: 21 to 27V DC
- Hold-up time: 10mS min at nominal Line
- Ripple-to-noise: 2% Vp-p maximum
- Dielectric withstand: I/PO/P 3,000V AC
- Leakage current: 0.25mA maximum
- Operating temperatures: -20 to +40°C
- Storage temperatures: -40 to +85°C
- Protections: OVP/OLP and short-circuit
- Safety standard: IEC/UL/EN60950-1, CB
- EMC standard: (EN55022, CISPR22, FCC part 15) class B, EN61000-3-2, -3-3, EN61000-4-2, 3, 4, 5, 6, 8, -11
- Standard output cable/length: UL2468, #20AWG/5ft
