注意：
1.建议LED灯条连接长度不超过5米，3/6 LED为环路，接口可以切割使用，但不能在中间切割一圈
2.根据条带连接后的总功率，配置合适的电源，并且还要保证LED适配器的功率必须大于负载功率，否则电源会烧毁
3. LED灯带由直流12V驱动，请不要使用输出直流5V或直流24V电源，不会点亮或烧坏，如果用直流21V驱动，请不要使用输出直流12V或直流36V电源，同样如上

Attention:
1. Suggest LED strip connection with length no more than 5 meters, 3/6 LED as a loop, the interface can be cut to use, but cannot be cut in the middle of a loop
2. Collocate suitable power supply according to the total power after strip concatenation, and also please assure the power of led adapter must be larger than the load power, or else the power supply will be burred out
3. LED strip drove by DC 12V, please do not use output DC 5V or DC 24V power supply, it will not light or burn out, if by DC 21V drive, please do not use output DC 12V or DC 36V power supply, same as above