Dry Bath Incubator with LCD Display and 0.1 Display Accuracy
带有LCD显示屏和0.1显示精度的干浴培养箱
议价
加入意向- 干浴孵化器MK20
- 特征：
- 液晶显示，易于设置和使用
- 同时显示设定和实际时间，温度
- 由于它配备了各种可选块，仪器可适应不同的管和井，以应付实验需要
- 它很容易更换金属块，非常简单toclean和消毒
- 定制块可用于满足您的特定需求
- 可靠的设计带有内部额外的温度保护
- 块的升高使块的改变容易和方便
- 温度偏差调节满足不同要求
- 微处理器控制的孵育时间和温度
- 蜂鸣信号/程序完成后停止
- 符合CE安全标准
- 产品规格：
- 温度控制范围：-10至100˚C
- 时间范围：1分钟至99小时59分钟
- 温度控制精度：d±0.3
- 显示精度：0.1
- 加热时间：d 15min（20〜100）
- 冷却时间：d 20min（从20到-5）如果室温低于30℃，d 30min（从20℃到-10℃）如果室温低于25℃
- 加热和冷却部件：TE模块
- 尺寸：300 x 220 x 170mm
- 净重：5kg
- Dry bath incubator MK20
- Features:
- LCD display, it is easy to setup and use
- Simultaneous display of set and actual time, temperature
- As it is equipped with various optional blocks, the instrumentcan adapt to different tubes and wells to cope with experimentalneeds
- It is easy to replace the metal blocks and is very simple toclean and sterilize
- Customized blocks are available to suit your specificdemands
- Reliable design with inner extra temperature protection
- Heave of the block makes block change easy and convenient
- Temperature deflection adjusting meet with differentdemands
- Microprocessor controlled incubation time and temperature
- Beep-signal/stop after program completion
- Conforms to CE safety standard
- Specifications:
- Temperature control range: -10 to 100˚C
- Timing range: 1min to 99 hours 59 minutes
- Temperature control accuracy: d ±0.3
- Display accuracy: 0.1
- Heating time: d 15min (from 20 to 100)
- Cooling Time: d 20min (from 20 to -5) If the room temperatureis lower 30, d 30min (from 20 to -10) If the room temperature islower 25
- Heating and cooling parts: TE module
- Dimension: 300 x 220 x 170mm
- Net weight: 5kg
