FC Fiber-optic Connector with Short Operating Time and Low Insertion Loss, Easy to Operate

FC Fiber-optic Connector with Short Operating Time and Low Insertion Loss, Easy to Operate

FC光纤连接器，工作时间短，插入损耗低，操作方便

1000+
3-5 USD

加入意向
特征：
    基于可插拔非预设管技术低插入和反射损失极易操作短工作时间另一端被精确劈裂并放入机械接头的机制两个现场光纤和光纤接头完全保护免受环境因素匹配到FTTX无需环氧树脂或抛光（用于PC ）适用于3.1 x 2.0mm分接电缆
产品规格：
    光纤直径：125μm（657A和657B）紧缓冲器直径：250μm光纤模式：单操作时间：约100s（不包括光纤切割）插入损耗：≤0.3dB（1,310和1,550nm）回波损耗：≤-40dB裸纤维：> 5N光纤夹持器的保持强度：> 10NTensile强度：> 50NS热处理或工作温度：-40至75°线强度（20N）：
      Δil：≤0.2dbΔrl：≤5db
    机械耐久性（500次）：
      Δil：≤0.2dbΔrl：≤5db
    落下试验：
      高度：4m（每个方向一次，共3次）ΔIL：≤0.2dBΔRL：≤5dB
此处显示的所有商标仅供参考。他们是其各自所有者的财产，我们没有授权销售带有此类商标的项目。

Features:
    Based on pluggable non-preset tube technologyLow insertion and back reflection lossExtremely easy for operationShort operating timeOther end is precisely cleaved and placed into mechanism of mechanical spliceBoth field fiber and fiber stub are fully protected from environment factorsFits into FTTXNo need of epoxy or polishing (for PC)Suitable for 3.1 x 2.0mm drop cable
Specifications:
    Optical fiber diameter: 125μm (657A and 657B)Tight buffer diameter: 250μmFiber mode: singleOperating time: about 100s (not including fiber cutting)Insert loss: ≤0.3dB (1,310 and 1,550nm)Return loss: ≤-40dBFastening strength of naked fiber: ﹥5NFastening strength of naked fiber holder: ﹥10NTensile strength: ﹥50NStorage or operating temperature: -40 to 75°COnline tensile strength (20N):
      ΔIL: ≤0.2dBΔRL: ≤5dB
    Mechanical durability (500 times):
      ΔIL: ≤0.2dBΔRL: ≤5dB
    Drop-off test:
      Height: 4m (once per direction, totally 3 times)ΔIL: ≤0.2dBΔRL: ≤5dB
All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.