SC Fiber-optic Connector with Short Operating Time and ﹥50N Tensile Strength, Easy to Operate

SC Fiber-optic Connector with Short Operating Time and ﹥50N Tensile Strength, Easy to Operate

SC光纤连接器，工作时间短，抗拉强度> 50N，操作方便

1000+
3-5 USD

加入意向
特征：
    基于可插拔非预设管技术其他端精确劈裂并放入机械接头的机制两个现场光纤和光纤接头完全保护免受环境因素影响，特别适合FTTX低插入和反射损失易于操作短工作时间无需环氧树脂或抛光（用于PC）直接连接ONU，不带任何光插座
规格：
    适用于Ø2和3.1mm分接光缆光纤直径：125μm（657A和657B）紧密缓冲器直径：250μm光纤模式：单操作时间：约100秒（不包括光纤切割）插入损耗：≤0.3dB（1,310和1,550nm） ：小于-40dB裸纤维的强度：> 5N裸纤维夹持器的硬化强度：> 10NTensens强度：> 50NS热处理/工作温度：-40〜75℃线强度（20N）：ΔIL≤0.3和RL≤5dB机械耐久性次）：ΔIL≤0.3和RL≤5dB脱落试验（脱落高度4m，每个方向一次，共3次）：ΔIL≤0.3和ΔRL≤5dB
此处显示的所有商标仅供参考。他们是其各自所有者的财产，我们没有授权销售带有此类商标的项目。

Features:
    Based on pluggable non-preset tube technologyOther end precisely cleaved and placed into mechanism of mechanical spliceBoth field fiber and fiber stub are fully protected from environmental factors, specially fits into FTTXLow insertion and back reflection lossEasy to operateShort operating timeNo need of epoxy or polishing (for PC)Directly connected with ONU without any optical socket
Specifications:
    Applicable for Ø2 and 3.1mm drop cableOptical fiber diameter: 125μm (657A and 657B)Tight buffer diameter: 250μmFiber mode: singleOperation time: about 100 seconds (no including fiber cutting)Insert loss: ≤0.3dB (1,310 and 1,550nm)Return loss: less than -40dBFastening strength of naked fiber: ﹥5NFastening strength of naked fiber holder: ﹥10NTensile strength: ﹥50NStorage/operating temperature: -40 to 75°COnline tensile strength (20N): ΔIL ≤0.3 and RL ≤5dBMechanical durability (500 times): ΔIL ≤0.3 and RL ≤5dBDrop-off test (drop-off height 4m, once per direction, totally 3 times): ΔIL ≤0.3 and ΔRL ≤5dB
All trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.