Steel Wire Reinforced Thermoplastic Composite Water Pipes

Steel Wire Reinforced Thermoplastic Composite Water Pipes

钢丝增强热塑性复合水管

500+
930-1030 USD

加入意向
产品特点：
1具有比塑料管更高的强度，刚度，抗冲击性
2，两面耐腐蚀，与塑料管具有相同的耐腐蚀性
3，工作温度高，导热系数低，在冬季使用时不需要外墙隔热，夏天使用时无需冷凝水
4S光滑整洁的内壁，无结垢，压头损失比钢管低30％
5管接连接采用电熔连接，是成熟技术，电熔接头具有很强的轴向抗拉力，管件有多种规格
6重量轻，运输和施工方便，管道整体可靠性高
7成本低，健康无毒，是镀锌管的最佳替代品

产品用途：
1化工行业
2油田，气田
3Mining
4Textile，染色，造纸行业
5市政工程
6有色金属
农业
8水上交通
9热工程
10Buried排水管，电缆疏通管
dn pn
基本尺寸极限偏差0.81.01.251.6
标称壁厚和极限偏差
75+1.2
0		 5.0 +1.2
0
90+1.4
0		 5.5 +1.5
0
110+1.5
0		 5.5 +1.5
0		5.5 +1.5
0		7.0 +1.5
0
140+1.7
0		 5.5 +1.5
0		5.5 +1.5
0		8.0 +1.5
0
160+2.0
0		 6.0 +1.5
0		6.0 +1.5
0		9.0 +1.5
0
200+2.3
0		 6.0 +1.5
0		6.0 +1.5
0		9.5 +1.5
0
225+2.5
0		 8.0 +1.5
0		8.0 +1.5
0		10.0 +2.0
0
250+2.5
0		8.0 +1.5
0		10.5 +2.0
0		10.5 +2.0
0		12.0 +2.2
0
315+2.7
0		9.5 +1.5
0		11.5 +2.0
0		11.5 +2.0
0		13.0 +2.5
0
355+2.8
0		10.0 +1.8
0		12.0 +2.2
0		12.0 +2.2
0		14.0 +2.5
0
400+3.0
0		10.5 +2.0
0		12.5 +2.2
0		12.5 +2.2
0		15.0 +2.8
0
450+3.2
0		11.5 +2.0
0		13.5 +2.5
0		13.5 +2.5
0		16.0 +2.8
0
500+3.2
0		12.5 +2.2
0		15.5 +2.8
0		15.5 +2.8
0		18.0 +3.0
0
560+3.2
0		17.0 +3.0
0		20.0 +3.0
0
630+3.2
0		20.0 +3.0
0		23.0 +3.0
0



Product characteristic:
1It has higher strength, stiffness, impact resistance than plastic pipe
2Corrosion resistance on both surfaces, it has same corrosion resistance with plastic pipe
3High work temperature, low thermal conductivity, heat insulation for outer wall is not required when it is used in winter, and no moisture condensation when it is used in summer
4Smooth and neat inner wall, no scaling, head loss is 30% lower than steel pipe
5Pipe connection adopts electric melting connection which is the mature technology, the electric melting joint has strong axial tension resistance, the pipe fittings have many specifications
6Lightweight, easy transportation and construction, overall reliability for pipes is high
7Low cost, health and nontoxic, it is the best substitute for galvanized pipe

Product use:
1Chemical industry
2Oil field, gas field
3Mining
4Textile, dyeing, paper-making industry
5Municipal engineering
6Nonferrous metal
7Agriculture
8Sea water transportation
9Thermal engineering
10Buried drainage pipe, cable dredge pipe
DN PN
Basic sizeLimit deviation0.81.01.251.6
Nominal wall thickness and limit deviation
75+1.2
0		 5.0 +1.2
0
90+1.4
0		 5.5 +1.5
0
110+1.5
0		 5.5 +1.5
0		5.5 +1.5
0		7.0 +1.5
0
140+1.7
0		 5.5 +1.5
0		5.5 +1.5
0		8.0 +1.5
0
160+2.0
0		 6.0 +1.5
0		6.0 +1.5
0		9.0 +1.5
0
200+2.3
0		 6.0 +1.5
0		6.0 +1.5
0		9.5 +1.5
0
225+2.5
0		 8.0 +1.5
0		8.0 +1.5
0		10.0 +2.0
0
250+2.5
0		8.0 +1.5
0		10.5 +2.0
0		10.5 +2.0
0		12.0 +2.2
0
315+2.7
0		9.5 +1.5
0		11.5 +2.0
0		11.5 +2.0
0		13.0 +2.5
0
355+2.8
0		10.0 +1.8
0		12.0 +2.2
0		12.0 +2.2
0		14.0 +2.5
0
400+3.0
0		10.5 +2.0
0		12.5 +2.2
0		12.5 +2.2
0		15.0 +2.8
0
450+3.2
0		11.5 +2.0
0		13.5 +2.5
0		13.5 +2.5
0		16.0 +2.8
0
500+3.2
0		12.5 +2.2
0		15.5 +2.8
0		15.5 +2.8
0		18.0 +3.0
0
560+3.2
0		17.0 +3.0
0		20.0 +3.0
0
630+3.2
0		20.0 +3.0
0		23.0 +3.0
0