RN-171 802.11 b/g Wireless LAN Module

RN-171 802.11 b/g Wireless LAN Module

RN-171 802.11 b / g无线LAN模块

议价

加入意向
RN171是一种小尺寸,超低功耗嵌入式TCP / IP模块,仅测量27 x 18 x 3.1 mm。 RN171像RN131一样,是一个全功能的802.11 b / g表面贴装模块。由于其小尺寸和极低的功耗,它是完美的移动无线应用,如资产监测,传感器和便携式电池供电设备。

为了快速,轻松地评估RN171模块,Microchip提供了RN-171-EK,一种紧凑型电池和USB供电套件,带有用于SoftAP和WPS模式的按钮。
特征完整的嵌入式2.4 GHz IEEE 802.11 b / g无线局域网模块
14通用输入/输出(GPIO)引脚(四个GPIO与UART共享)
八个模拟传感器输入
小表面贴装模块:1.050'×0.700'×0.125'(26.67mm×17.78mm×3.18mm)
集成晶体,内部稳压器,匹配电路,功率放大器
轻松集成到最终产品 - 最小化产品开发,提供使用简单的ASCII命令配置的更快的市场时间
联网:
- 支持基础设施和SoftAp网络模式
- 内置网络应用:TCP,UDP,DHCP,DNS,ICMP,ARP,HTTP客户端和FTP客户端
- 完整的板载TCP / IP网络堆栈
- 唯一MAC地址
- 使用FTP升级固件
- 支持Wi-Fi®保护设置(WPS)
能源管理超低功耗睡眠模式(4 uA)
完美的便携式电池供电设备
电池升压控制电路
时间戳,自动睡眠和自动唤醒的实时时钟
天线通过RF垫的外部天线连接
认证天线类型:芯片,鞭,PCB走线和电线
合规性模块化认证为美国(FCC)和加拿大(IC)
欧洲R&TTE指令评估的无线电模块
澳大利亚,新西兰,韩国,台湾
媒体访问控制(MAC)/基带特性security:wep-128,wpa-psk(tkip),wpa2-psk(aes)
操作工作电压:3.3V(典型值)
温度范围:-40C至+ 85C工业
低电流消耗:
- Rx模式:40 mA
- Tx模式:在0 dBm时为120 mA
- 睡眠:4μA
射频/模拟特性频率:2.412至2.462 GHz
调制:
- 802.11b兼容性:dsss(cck-11,cck-5.5,dqpsk-2,dbpsk-1)
- 802.11g:ofdm
- 接收灵敏度:-83 dBm典型值
- 功率输出:0至+12 dBm
空中数据速率802.11b的1-11 Mbps
802.11g为6-54 Mbps
应用程序远程设备监控
遥测
工业传感器
家庭自动化



The RN171 is a small form factor, ultra-low power embedded TCP/IP module measuring only 27 x 18 x 3.1 mm. The RN171, like the RN131, is a full-featured 802.11 b/g surface mount module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices.

For quickly and easily evaluating the RN171 module, Microchip offers the RN-171-EK, a compact, battery and USB-powered kit with push buttons for SoftAP and WPS mode.
FeaturesComplete, Embedded 2.4 GHz IEEE 802.11 b/g Wireless LAN Module
14 General Purpose Input/Output (GPIO) Pins (Four GPIOs shared with UART)
Eight Analog Sensor Inputs
Small Surface-Mount Module: 1.050' x 0.700' x 0.125' (26.67 mm x 17.78 mm x 3.18 mm)
Integrated Crystal, Internal Voltage Regulator, Matching Circuitry, Power Amplifier
Integrates Easily into Final Product – Minimizes Product Development, Provides Quicker Time to Market Configured using Simple ASCII Commands
Networking:
- Supports Infrastructure and SoftAp Networking Modes
- Built-in Networking Applications: TCP, UDP, DHCP, DNS, ICMP, ARP, HTTP Client, and FTP Client
- Complete On-Board TCP/IP Networking Stack
- Unique MAC Address
- Upgrade Firmware Over the Air using FTP
- Supports Wi-Fi® Protected Setup (WPS)
Power ManagementUltra Low-Power Sleep Mode (4 uA)
Perfect for Portable Battery Operated Devices
Battery Boost Control Circuitry
Real-Time Clock for Time Stamping, Auto-Sleep, and Auto-Wake
AntennaExternal Antenna Connection via RF Pad
Certified Antenna Types: Chip, Whip, PCB Trace, and Wire
ComplianceModular Certified for the United States (FCC) and Canada (IC)
European R&TTE Directive Assessed Radio Module
Australia, New Zealand, Korea, Taiwan
Media Access Control (MAC)/Baseband FeaturesSecurity: WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES)
OperationalOperating Voltage: 3.3V (typical)
Temperature Range: -40C to +85C Industrial
Low-Current Consumption:
- Rx mode: 40 mA
- Tx mode: 120 mA at 0 dBm
- Sleep: 4 µA
RF/Analog FeaturesFrequency: 2.412 to 2.462 GHz
Modulation:
- 802.11b Compatibility: DSSS (CCK-11, CCK-5.5, DQPSK-2, DBPSK-1)
- 802.11g: OFDM
- Receive Sensitivity: -83 dBm Typical
- Power Output: 0 to +12 dBm
Over-the-Air Data Rate1-11 Mbps for 802.11b
6-54 Mbps for 802.11g
ApplicationsRemote Equipment Monitoring
Telemetry
Industrial Sensors
Home Automation