Thermo-shaker for Microtube, with 200 to 1, 200rpm Shaking Range
Microtube的热振荡器，200至1,200rpm振荡范围
议价
加入意向- 微管热振荡器（MB100-2A）
- 特征：
- 微处理器控制的时间，rpm和温度
- 微孔板上下的加热板
- 以0.1℃的步骤孵育至80℃
- 同时振荡和孵育四个微孔板
- 蜂鸣信号和程序完成后振动的停止
- 出色的温度精度和均匀性
- 规格：
- 孵育：孵育范围从高于环境温度8°C到70°C
- 0.1℃步骤
- 温度稳定性：±0.3°C
- 温度梯度： <0.5°C across the plate (at37°C)
- 预热速度： <25 min from 20 to 70°C
- 抖动：1.0mm轨道半径
- 振动范围：200〜1,200rpm
- 增量：1rpm
- 定时摇动：
- 范围：0到99小时，59分钟，1分钟步
- 连续摇动没有时间限制
- 容量：最多2个微孔板
- 电源要求：110 / 220V，60 / 50Hz，最大150VA
- Thermo-shaker for microtubes (MB100-2A)
- Features:
- Microprocessor controlled time, rpm, and temperature
- Heating plates above and below the microplates
- Incubation up to 80°C in 0.1°C steps
- Shakes and incubates four microplates simultaneously
- Beep-signal and stop of shaking motion after programcompletion
- Excellent temperature accuracy and uniformity across theplate
- Specifications:
- Incubation: incubation range from 8°C above ambient to70°C
- 0.1°C steps
- Temperature stability: ±0.3°C
- Temperature gradient: <0.5°C across the plate (at37°C)
- Warming up speed: <25 min from 20 to 70°C
- Shaking: 1.0mm orbit radius
- Shaking range: from 200 to 1,200rpm
- Increment: 1rpm
- Timed shaking:
- Range: 0 to 99 hours, 59 minutes in 1 minute steps
- Continuous shaking no time limit
- Capacity: up to 2 microplates
- Power requirements: 110/220V, 60/50Hz, max 150VA
