推入配合连接器使拼接MicroDuct快速和容易将MicroDucts推到耦合中心不需要工具连接器可以连接和断开10次，仍然保持对吹风安装系统的高性能要求在15bar（218psi）操作，最大允许泄漏率为1cc / min这相当于每3秒1个气泡在现场使用了更高的压力，没有增加泄漏率快速爆裂等级为25bar（363psi）

The push-fit connectors make splicing MicroDuct fast and easySimply push the MicroDucts into the center of the couplingNo tools are requiredThe coupler can be connected and disconnected 10 times and still maintain the high-performance requirements for air blown installation systemsOperate at 15bar (218psi) with a maximum permissible leakage rate of 1cc/minThis is equivalent to 1 bubble every 3 secondsHigher pressures have been used in the field with no increase in leakage rateQuick burst rating is 25bar (363psi)