12W dimmable sound control LED driver
12W可调光声控LED驱动器
可调光声音传感器LED驱动器：
- 内置有源PFC，PF≥0.95
- 效率：> 87％。
- 端子块连接
- 功率：12W
- 输出直流电压：40-60V（可定制）。
- 输出直流电流：
- 200mA（@sound≥50dB）----定制为最大500mA
- 100mA（@sound<50dB)----can be custom-made
- 连接：接线端子
- 尺寸：110 * 25 * 18mm（长*宽*高） - 可定制
- 当人们经过时，200mA / 60V DC，最后约60秒亮。
- 无通道（半负载）时100mA / 60V DC
优点：
- 最低功耗
- 满载12W持续约1分钟。 （60秒〜2分钟可定制）。
- 跳线用声音传感器控制或不用，方便操作
- 灵敏度可以通过电位器改变
- 采用最佳元件，低温升，低热，恒流输出
- 电容器6000H @ 105°C
Dimmable sound sensor Driver in PCB for LED lights:
- Built in active PFC, PF≥0.95
- Efficiency: ﹥87%.
- Terminal block connections
- Power: 12W
- Output DC voltage: 40-60V (can be custom-made.)
- Output DC current:
- 200mA(@sound≥50dB)----custom-made for 500mA maximum
- 100mA(@sound<50dB)----can be custom-made
- Connections: terminal blocks
- Size: 110*25*18mm(L*W*H)--can be custom-made
- 200mA/60V DC when people pass by, lights on last about 60 seconds.
- 100mA/60V DC when nobody at passageway (half-load)
Advantages:
- Lowest power consumption
- Full load 12W last about 1 minutes. (60 seconds~2 minutes can be custom-made.)
- Jumper to control with sound sensor or without, easily operated
- Sensitivity can be changed by potentionmeter
- Adopt best components, low temperature rise, low heat, constant current output
- Capacitors 6000H @105°C
