材料：ABS或PC大气压力：70和106kPa密封结构：热收缩密封最大容量：96芯绝缘电阻：≥2×104Mƍ环境温度：-40至65°CWaterproof目的：天线，直埋，墙面安装和管道铺设方式光纤性能：在光纤安装设备中，光纤连接器在FOSC安装操作期间不会衰减。性能：封闭后密封，然后在水中加压至100±5kPa，浸入15分钟，无气泡，观察24小时，无空气变化压力重新封装性能：封口在水中加压至100±5kPa，浸入15分钟，无气泡，观察24小时，3次重复封装后气压无变化耐压强度：15kV直流/ 1分钟，非穿刺和无电弧结束包括：

密封和绝缘胶带尼龙扎带光缆热收缩套管金属钩密封件

用途和属性：

广泛应用于通信，网络系统，CATV和光纤电缆的有线电视通过网络延伸到开放结构机械压力的空气接入系统用于2个或更多光缆之间的保护连接适用于单芯和带状光纤电缆

尺寸：460 x 160mm，直立型重量：2.1kg，直立型内部：20年此处显示的所有商标仅供参考。他们是其各自所有者的财产，我们没有授权销售带有此类商标的物品。

Materials: ABS or PCAtmospheric pressure: 70 and 106kPaSealing structure: heat shrinkable sealingMaximum capacity: 96 coresInsulation resistance: ≥2 x 104MƍEnvironment temperature: -40 to 65°CWaterproofPurposes: aerial, direct burying, wall mounting and pipeline laying wayOptic property: spare fiber coiled in fiber emplacing device, fiber connector would not attenuates during FOSC installation operation periodSeal performance: after closures are sealed, then pressurized up to 100 ±5kPa in water, immersed in 15 minutes, no air bubbles, observed for 24 hours and no change of air pressureRe-encapsulation performance: closures are pressurized up to 100 ±5kPa in water, immersed in 15 minutes, no air bubbles, observed for 24 hours, no change of air pressure after 3 times of repeat encapsulationVoltage-resistant strength: under effect of 15kV DC/1 minute, non-puncture and no arc-overIncludes:

Seal and insulation tapeNylon tieOptical cable heat shrinkable sleeveMetal hookSeal fittingsNumeral barRetaining ring

Uses and properties:

Widely used for communication, network system, cabled TV of CATV and fiber optic cable by networkBelonged to open structure airproof tie-in system of machine pressureUsed for protective connection between 2 or more optical cablesSuitable for single core and ribbon fiber optic cable

Size: 460 x 160mm, erect typeWeight: 2.1kg, erect typeLifespan: 20 yearsAll trademarks shown here are for reference purposes only. They are the property of their respective owners, and we are not authorized to sell items bearing such trademarks.