Burner controller flame switch BC1000A0220U/E
燃烧器控制器火焰开关BC1000A0220U / E
- 燃烧器控制器火焰开关BBC1000A0220U / E
- 产品手册：
- BC1000基本燃烧过程控制器
- BC1000用于大型商业和工业火焰燃烧装置开关
- 具有较低的功能：
- 简单的火焰开关功能，指示火焰的存在或不存在
- 燃烧安全控制器，系统可提供安全启动检查和火焰监测功能内置安全检查启动电路，启动火焰探测器以检测同事是否正常工作（当终端通电时）
- 时间显示有火焰，不会打开安全继电器，所以当控制器给出启动信号时系统不会启动
- BC1000连接到火焰离子化棒或Honeywell UV探头（C7035A1064，C7027A1049）
- 紧凑，通过插入式底座，使用轨道安装，易于安装
- 三个LED指示灯，表示三种状态：电源，火灾，安全检测启动（SSC）
- 火焰强度可以在终端前测量，或连续测量监控
- model bc1000a0220u / bc1000a0220f / bc1000a0110u / bc1000a0110f
- 火灾探测型C7027A1049 / C7035A1064离子棒C7027A1049 / C7035A1064离子棒
- 工作电压220V / 220V / 110V / 110V
| bc1000a0110f bc1000a0110u bc1000a0220f bc1000a0220u 1404f1078 uq270a1024 bc1000a0220u |
- Burner controller flame switch BBC1000A0220U/E
- Product manual:
- BC1000 basic combustion process controller
- BC1000 is used in large commercial and industrial flame combustion device switches on
- Has a lower function:
- Simple flame switch function, which indicates the presence or absence of flame
- Combustion safety controller, the system can provide safe start check and flame monitoring function built-in security checks starting circuit for starting the flame detector to detect whether a colleague is working properly (when the terminal was powered up)
- Time showed the presence of a flame, it will not turn on the safety relay, so the system will not be started when the controller to give the start signal
- BC1000 to be connected to a flame ionization rod or Honeywell UV probe (C7035A1064, C7027A1049)
- Compact, by way of plug-in base, using the track to install, easy to install
- Three LED indicators, representing three states: power, fire, safety detection start (SSC)
- Flame intensity can be measured in front of the terminal, or continuous measurement monitoring
- Model BC1000A0220U/BC1000A0220F/BC1000A0110U/ BC1000A0110F
- Fire detection type C7027A1049/C7035A1064 ion bar C7027A1049/C7035A1064 ion bar
- Operating voltage 220V/220V/110V/110V
| BC1000A0110F BC1000A0110U BC1000A0220F BC1000A0220U L404F1078 UQ270A1024 BC1000A0220U |
