Mining Vehicle Safe-Driving Systems

Mining Vehicle Safe-Driving Systems

矿用车安全驾驶系统

议价

加入意向
  • 四显示器摄像系统
  • 能够同时显示4个摄像机视图,用于整体监控,自由工作电压为11至32V DC
  • 7英寸数字屏幕TFT显示器OSD菜单分别设置每个摄像机镜像/正常图像,反转图像延迟,优先级反向摄像机和自动切换显示模式1电缆解决方案系统使用户可以方便地在任何地方安装和使用设备
  • 铝壳IP68防水备用相机
  • 内置18pcs红外LED在黑暗中的图片支持
  • 图像类型:1/3英寸彩色Sharp CCD
  • 水平分辨率:420TVL
  • 有效像素:
    • ntsc:510(h)x 492(v)
    • pal:500(h)x 582(v)
  • 可用照明:0 lux(内置12pcs红外LED,用于黑暗中的图片支持)
  • 自由视角:130°
  • 防水:IP69k
  • 防震:10G
  • 视频输出:1.0Vp-p /75Ω
  • 自动加热低于+ 10℃
  • 电源:来自倒车监视器的12V直流电
  • 尺寸:69(宽)x 43(高)x 38毫米(D)(无安装)
  • 带可拆卸的遮阳板
  • 可以选择单视图/分割视图/四图像视图
  • OSD菜单分别设置每个摄像机触发优先级OSD菜单分别设置每个摄像机反转图像延迟时间0到30秒
  • OSD菜单分别设置每个镜头/正常图像
  • 手动和自动切换显示模式
  • 颜色系统:PAL / NTSC(自动)
  • 显示分辨率:2,400(H)x 480(V)点
  • 支持四个摄像头输入:1.0Vp-p /75Ω
  • 广视角(CR> 10):
    • 上/下:45/65°
    • 左/右:65/65°
  • 亮度:300cd /m²(根据自动调整环境)
  • 对比度:500:1
  • 背光:单LED
  • 工作温度:-20至+ 70°C
  • 储存温度:-30至+ 80°C
  • 自由工作电压






  • Quad monitor camera system
  • Able to show 4 camera views at one time for overall surveillance, free operating voltage of 11 to 32V DC
  • 7-inch digital screen TFT monitor OSD menu separately set each camera mirror/normal image, reversing image delay, priority of reverse camera and automatic switch display mode 1 cable solution system make it easy for users to install and use the device in any places
  • Aluminum shell IP68 waterproof backup camera
  • Built-in 18pcs IR LED for picture support in the dark
  • Image type: 1/3-inch color Sharp CCD
  • Horizontal resolution: 420TVL
  • Effective pixels:
    • NTSC: 510 (H) x 492 (V)
    • PAL: 500 (H) x 582 (V)
  • Usable illumination: 0 lux (built-in 12pcs IR LED for picture support in the dark)
  • Free viewing angle: 130°
  • Waterproof: IP69k
  • Shockproof: 10G
  • Video output: 1.0Vp-p/75Ω
  • Automatic heating below +10°C
  • Power supply: 12V DC from reversing monitor
  • Dimensions: 69 (W) x 43 (H) x 38mm (D) (without mounting)
  • With removable sun visor
  • Single view/split view/quad image view selectable
  • OSD menu separately set each camera trigger priority OSD menu separately set each camera reversing image delay time 0 to 30 seconds
  • OSD menu separately set each camera mirror/normal image
  • Manual and automatic switch display mode
  • Color system: PAL/NTSC (auto)
  • Display resolution: 2,400 (H) x 480 (V) dots
  • Supports four camera inputs: 1.0Vp-p/75Ω
  • Wide viewing angle (CR﹥10):
    • Up/down: 45/65°
    • Left/right: 65/65°
  • Brightness: 300cd/m² (automatically adjust environment by according)
  • Contrast ratio: 500:1
  • Backlight: single LED
  • Operating temperature: -20 to +70°C
  • Storage temperature: -30 to +80°C
  • Free operating voltage